Search results

The other one i can't get me head round is, if meathane is an ozone depleating gas, why are there so many politicians around the world spouting BULL ****.

I have a puncture in the rear nearside wheel, it's only flat at the bottom, so if i take it off and put it back on 180 deg out (with the flat bit on top) will i still be able to use it until i can get to a garage. :5biamwithstupid: :5biagree: :behindsofa:

Hi Mtechuk I did a temporary connection and it fired straight up. The starter motor is on the other side of the engine on the v8's. I then made proper connections and taped the wires back up, i rerouted the cable away from the cat, the wire i used was a twin pair screened, there were two...

Mechuk It was the crankshaft position sensor wire, somwhere from the plug to the ECU, so ripped it out and replaced it, the old one was brittle, i think it due to the heat from the exhaust and engine. Ian

Hi Craig I must admit i didn't shim the rockers and it's work well for me, done nearly 40k now. :D

Hi Craig If you are intrested i have a performance camshaft for sale, it's brand new still in the box, i bought it cos i thought mine had gone for a second time, had only done 35k on the last one, stripped engine engine and the cam was perfect, so no need to replace it, eventualy found the...

Tut,Tut shouldn't you be shopping at Iceland :bolt::behindsofa:

Hi I was quoted £1500 for a sequentual kit fulley fitted on a p38 and it was not a cheap sh*te one either, my 3.9 disco is a single point lpg, good ish econamy, with a few engine and exhaust mods, sounds good and pulls realy well. Becky, you gotta keep the v8, it will make sence, drive for a...

Hi Craig It all depends how handy you are with a bag of spanners. I changed the camshaft in my 3.9 when i bought it, it was the reason it was cheap, i fitted a performance one as a replacement, made a differance and now i have a free flow air filter, 4 branch stainless downpipes and twin hand...

Beasty It was amazing i didn't break down in the heat, payed a garage to fix and only lasted a week, so decided to do it myself and i know it's done.

Hi all Well i think i have managed to sort out the starting issue, hopefuly permenent this time, every time i moved the loom that runs from the ECU to the back of the engine, it would splutter or cut out all together, move the loom again at it would start. I removed the loom covering and...

hi Mtechuk It only displayed the gearbox fault for a second or so and never came back on, but the P-R-N-D-3-2-1 was not displayed either, the only way i got the display back was to turn the engine off and restart and all seem to be working as it is supposed too, with the full use of gears. I...

Just to up date you all, after the garage had my R/R for 3 weeks to sort out the starting fault, i have had it back less than a week and it's refused to start again this morning. :doh: Got the wife out to turn the key while i played with the wiring loom and it started, so dorve to my workshop...

Is this the reason why, when ever i see a p38 it's being driven by somone that is bald :doh:

Hi Sorry i don't think this works, firing order is 1-8-4-3-6-5-7-2, so half way through the list is number 6, so 1 and 6 would be at tdc together, therefore 1 and 6, 8 and 5, 4 and 7 and 3 and 2 would at tdc together, the only time i have heard of the 9 rule was for doing the tappets on a four...

taste good though :D:D:D

They first of all said they could not get a connection, then an electrician got that sorted, it was the fuse (33) they checked the system and it came up with the csp sensor fault, once they got it running they reconnected the test equipment but could not access the srs unit, so i told them to...

I haven't done anything to mine, except pick it up from the garage, fixed :cheer2::cheer2:

Hi I R The problem was the plastic outer was intact but the core was broken. they also tried to sort out the air bag fault/srs, but the genuine landrover test equipment couldn't comunicate with the srs unit, any ideas.

Today i had a call from the garage to say they found the problem with my rangerover, only took three weeks to look at it, it would turn over but did not have a spark, i changed the crankshaft sensor as did the previous two garages (before i owned) it turned out to be a broken wire in the loom...