Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. m1hgv

    Some pics of my Disco :D

    nice i want a sticker like that :D where did u get it from mr noisy
  2. m1hgv

    Plate under the bonnet?

    hello harold just go to your local DREAL office and get the vehicle id papers it cost me 67 euros for mine because it comes under the national type not CoC certifacat de conformitié and the go straight to prefecture to register as you probably already know...
  3. m1hgv

    Series King Cab

    anything is possible lol if u fab a xmeber to mount the rubber mount to iirc bedford cf had them and the older transits you could cut the prop weld a cv joint in an even leave uj on diff end may be a biactch to balance the prop after but in theory super wide angle
  4. m1hgv

    Series King Cab

    hi doc just been reading your fred you probably sorted the prop now but what about adapting hd cv joints instead of uj with a centre bearing to support prorp i have seen them on tractor units with high lift air suspension??? just a thought martin M1HGV
  5. m1hgv

    Problem PLEASE HELP!!

    good stuff :D
  6. m1hgv

    Faskit installation?

    hiya if you are still stuck i can translate it for you if that helps
  7. m1hgv

    Problem PLEASE HELP!!

    mine is an L reg 93 200 tdi and they defo do cos i had to redo mine for the same reason lol on drivers side from bulkhead mine were about a foot towards front grill clipped to inner wing i just cut em and joind wi block connectors insulation tape and then sum ov that nasty orrid sticky gass...
  8. m1hgv

    Problem PLEASE HELP!!

    check the wiring under the bonnet on drivers side inner wing u will have to get rid of the cloth shething in side are fusible connections they will be corroded 1 + will be broken i had same problem fixed in 10 mins
  9. m1hgv

    200 tdi 1993 no side lights hazzards horn c/l

    :praise: thanks guys managed to find the _àè-(_è&-&è__è fusible links 3 out of the 4 were shot the 4th had already been re done this now means i have to weld the hole in the inner wing to try and stop the water gettin in there should be fine i wrapped them in insulation tape then some of that...
  10. m1hgv

    200 tdi 1993 no side lights hazzards horn c/l

    no i havent im in france so i will have to find one or wait till end of month till i come over to uk luckily i dont need to use it its just annoying cos indicators work but the rest on that stalk doesnt and there is no power to the fuse box on those fuses is the stalk before or after the fuses...
  11. m1hgv

    200 tdi 1993 no side lights hazzards horn c/l

    ok thanks fellas did all that but its still the same no sides heads hazards horn central locking or alarm this all started cos her indoors flashed headlamps at her mate and ping it all went dark i have disconected all the blocks i could find and cleaned the conections they wernt to bad i...
  12. m1hgv

    hello from france

    i have checked all earth leads cleaned and greased them checked all fuses and as may connector plugs as i can find its still the same only thing that changed is mi bald patch got bigger
  13. m1hgv

    hello from france

    hi im in dpt 02 in france l'aisne nr compiegne where do i start all the electrics that would normally work direct from battery without ignition switched dont work and if i switch sides or hazards on it wont start c/l alarm is u s also where is la combe which dpt thanks for any help...
  14. m1hgv

    200 tdi 1993 no side lights hazzards horn c/l

    hi all my disco is giving me more grief than the ex wife all was well till i flashed headlamps at a mate of mine then all the side lights headlamps hazzards horn and central locking stopped working the alarm stopped working also . the engine starts wipers indicators brake lights...
  15. m1hgv

    hello from france

    hi my name is martin and i hate electrical fault finding:confused: i live in picardie northern france i am english and i have a 93 200 tdi disco that gives me no end of electrical problems hope there are some good sparks in this forum im pretty good with the oily bits but electrics are not my...
Back
Top