Search results

After the theft I was a bit strained..!!!! Actually I was wrong in my description (I think) what I meant to describe was the front face panel was stolen not the main stereo body itself so the wires weren't pulled. So thanks for that, made me think..!!

Here's a strange one. Some a"£Ehole stole my head unit from my 1993 Classic. So I put a new stereo in but no sound at all..!!!! Wired a speaker directly to the stereo and got sound so no problems there (it's a Sony) and am wondering if there is an amplifier set up somewhere that I should be...

Mark, what wire was that..? I am having the same sort of problem in my 93 RRC. Stereo works fine in an another car but no sound in my Rangie...!!!!

Demounted the ZF box and fund the starter motor shroud in the bell housing is on the wrong side..!!! So no go there, Oh well.................

Found Zens' thread.......see, we are out here......

I bet this is the first time this question has been asked:- Has anyone ever retrofitted a Classic with air suspension. My 1983 has a two inch lift and instead of just replacing the springs etc I wonder if I could stick in an air system. Not looking to bounce her up and down to impress the...

I pulled of the dash to check the ignition load relay and realised I need a multimeter to see if it was getting power.......so.......got the multimeter and ran it over one of my batteries first (dual batteries, one for the starter and one for all else). What do you know, the ignition one was...

Thanks gent, I was hoping it was a relay hidden in the depths of the dash.......will troubleshoot and then probably run a hot wire to the ignition.

OMG........Lucas prince of Darkness strikes again.......!!!!!!!!!!!!!! Thanks gents

That's a good idea...!!! 1993 model

Gents, Have a problem now. Went to start my RRC and heard a funny sound in the dash and have completely lost all electrical power. Battery is still charged but nothing electrical works, not even the Hazard warning lights. Is there a special relay I should be looking for, checked the manual but...

Hope my injection pump is standard !!! The turbo is missing a vacuum line it looks like, further investigation required. The pic is also of the electric vacuum pump so an ordinary alternator can be used, one without the vacuum pump plumbed into the engine. The starter works well so I think the...

Here is the pic of the fuel cut off setup. It is in the off mode now but when the engine is on and the vacuum made the lever pulls back to the on position. No other position that I can see, just off and on. The green/yellow wire is a temp setup to fix a broken wire and most probably the cause of...

She has SD33 stamped on the rocker cover and the fuel cut off switch is certainly vacuum controlled, looks like the pump may be as well. Apparently the conversion was done in England circa. 1993 but I've only had her for a few days. Plan to replace the 2" exhaust with a 3" one that came with the...

Thanks Zen, I stay in Norway these days and with 50 mph the speed limit and combined with hills, hills and more hills the low gearing is fine..!!! Different story if going to europe though. It's got an intercooler and I'm very impressed with the performance but my wife would like another...

Looks like a LT95, the reverse is up and to the left. Really want to know if there is enough room for the torque converter.

Hei all, Just got a RRC with a Nissan SD33T in it and want to stick in the V8 ZF Auto box that I have......but before I start to undo has anyone done this and have any pointers for me............ Not one of the usual questions I suppose..!!

Ah yes but what was the reason..?

Hei there, I've put a 200Di into my series but it hasn't got the coupling to hand crank it. Just wondering if any of you 'modern' fellows has ever hand cranked a 200TDi ? Used to do it too my petrol series for ages but never tried a diesel, suspect the compression is to great but be good to hear...

Thanks for that, that's the idea I had.