Search results

Take it i dont need to remove the hub nut like on some cars. That is what was putting me of the job.

Hi boys and ladies to, the back breaks on my flander are stuck fast in the mornings, any ideas? If i take the drums of to inspect the workings do i have to remove the hub nut or are they held on a different way? Thanks in advance for your help!:ballchain:

Job done!

Ok, here goes, stripped door down, night mare! removed latch which was moist, dried it as much as possible put it back on and it made no difference, so, i can only assume there is damp inside the sealed unit. Reassembled the door but left the wire of the unit and everything works fine apart from...

Thanks for your help Colin, i shall have a look at the weekend and let you know the outcome. As for you Mr Opto P thanks for your sarcasm and advice, I shall also look at that possibility to! Wulf Man, thanks for the read!

Where are u!

Please help me people, when i lock the doors on my Freeby with my keyfob, all of them lock, then the drivers door opens all on its own, the rest stay shut, car does start no problem if that helps. If I lock it manually it will stay shut but I do have to hold the key in the locked position whilst...

:)

Mines a 52 plate, done 54000 miles

Lord redhead, im far from a young pup, really i am!!!!!!!!!!

Come on fella a people carrier, which would you really preffer????????

Sorry to you to Sir, i only got it as i have a growing family and could not bear to own a people carrier:D

Mr redhead, i give up, you are the best and im very sorry for my insolence:yawn:

Well that stired up a fuss with the sad'os. OOOOOOOHHHHHHHH look at me i've got a defender, bet that helps you pull the chicks.What are you up to this weekend, going to a meet, lumberjack shirt, novelty hat or are you doing somthing interesting instead!!!!

Look dude there are loads of tits on hear and you never get a striaght answer. The pipe you see with the smoke is Quite normal, its a pre burner, helps warm things up abit quiker. It will stay on for abit when you turn the engine of if the car is not warmed up and smoke will come out, it is...

All done on warrenty, it was the pump, thanks for all your help:D

Was the pump, all done on warrenty, thanks.........:D

Thanks boys will do:boxing:

Sounds the same to what i have. Ok when engine cold as revs are slightly hire at idle, enough to work steering. when engine hot the revs are lower at idle and steering heavy. The pump change 95% fixed your trouble then? How much was it? if you dont mind me asking.

Power steering heavy at idle on my 2002 freeby td4. Levels fine, Belt fine, steering fine even with the slightest touch of throttle but not at idle. Any ideas? it is under warrenty but they are a bit dum at the garage and dont trust them to diag the problem correctly. Need to go in with some...