Search results

And finally.

Here are some more.

I hope these help, let me know if you need some more.

Would photos of an 1988 with a charcoal canister be of any help?

Out of interest, how does the aerial lead attach to the heated screen element?

It certainly seems as if I am not going to be able to find a replacement cover. 2 of the lugs have broken off so I have sealed it on using black silicone.

Thanks for the responses and information. I saw from the Parts Catalogue that the only aerial options were a post or through the rear screen element but I find it hard to believe that, if there had been a problem with the screen element aerial, LR would have gone to the trouble of installing a...

It originally had the Land Rover factory fit Clarion radio/cassette player which I replaced with an Alpine unit when the Clarion gave up the ghost. Not sure if it makes any difference but the RR was originally produced for the Australian market.

Understood to have been fitted from new, I have owned it since 1991 and previous to that it was registered to Land Rover.

Hi Can anyone tell me where I can get a replacement cover for the roof aerial on a 1988 Classic RR? Thanks Doug

Thanks for the information and advice on closing. I could do with a new glass as well so will opt for the Famous Four one with the Pilkington glass (apparently it is thicker that the other glass which is produced in China).

Hi I have a 1988 Classic RR and need to replace the upper tailgate. I have looked at several online including Famous Fours with and without Pilkington glass (which is OEM) and BRITPARTS but have no idea which is the best. I would appreciate any advice and recommendations. Thanks

Locket, thanks for the detailed information. If I lower the glass fully and tape it to the door, is it likely to stay in place when I slide the frame out?

Thanks for the response. I only need to remove the frame to replace it and am hoping that I can do so without having to remove the glass or anything else.

Hi I have a 1988 4 door RR and would be grateful for some advice regarding the replacement of the rear door glass frames. Is it possible to remove and replace these without removing the glass or anything else? If so, apart from undoing the bolts on the door frame, are there any other steps I...

Hi I would be grateful for some advice. I have an 88 3.5 EFI and have a leak from the top plate (its a recondition Adwest 4 bolt which was fitted 4 years and 16,000 miles ago). Before having looked at I was wondering how it easy it is to replace the top plate seal/ O ring? Thanks Doug

I would be grateful for some advice, I need to replace both the front and back bumpers and was wondering if after market ones differ in qualify and, if so, which are the best (Britparts seem to be much more expensive than others). Thanks Doug

I have a 1988 3.5 and would be grateful for some advice. Both swivel housings are leaking and I was wondering whether it is worth replacing the standard oil with the one shot grease or best just to have the seals replaced and, if the latter, what other parts should be replaced at the same time...

I have a 1988 and would be grateful for some advice: My central locking has just stopped working (no previous problems). I checked the fuse which had blown so replaced it but it still did not work and the new fuse did not blow. Is it likely to be the drivers actuator or what else could it...

Hi I would be grateful for some advice: I have a replacement charcoal canister for my 88 3.5 EFI, it has 2 connections at the top (for the line to fuel tank and the purge line) but also a larger one at the bottom which has a plastic plug in it. My existing canister also has an outlet...