Search results

You should give the braking surface a rub with some emery cloth to take the shine off cloud also help but I would use britpart for brakes buy decent make some thing like mintex you only get what you pay for

The rear brakes I would strip down and put copper slip grease on all the places where the brake shoes touch the back plates and check the edge of the material if it's squared off file it to a 45 degree angle

The horse shoe clip is TOO100000 at £2.77 plus vat through britcar it's called prop shaft yoke clip f/l hope this helps

I think I it's about 60 ltrs

If you really want the glow plug removed give these a go Steve of extract engineering 102 Lowry hill road Carlisle Cumbria 077 536 181 72they travel to you if wanted and do the job without taking the head off and at your place very helpful bloke ps does injectors as well

I use meguiers trim polish 3 for 2 at halfrauds at £9.99 a bottle it also works good on the arches and interior trim

Hi I have a 04 reg td4 with black interior and want the little dome of plastis that covers the button near the headrests that confirms the seat are fastened in correct scrap yards won't give me one say you can buy the interior for £200 any help would be appreciated cheers

Looks to me as if the baffle inside has came loose looks like you'll need a new one m8

Yes you can replace the bulbs yourself disconnect the cables and wiring and a set of long nose pliers as they are sunk pretty deep in the control unit but pretty straight forward

If you look carefully the threaded part looks like it's got 2 seal at the top a I ringing the centre round bit and another at the top of the thread

I bought 2 for £10 lasted 2 month went to Eurocarparts and bought 2 lemformber for £25 each you get what you pay for do job once buy decent ones first well worth the money Delphi or just as good

I fitted a parrot 3100 to my 2005 model with the standard radio you just need a patch lead to connect them together about. £15 off eBay and they are a doddle to fit 1.5 hrs max for a novice about half an hour if you know what your doing

Try looking through the drivers wheel arch where the track rod goes through the wing you should see it from there easier

Could it not be a bent bracket that the slave sits in I've read it's a common problem on the petrol Freelander

It's smaller than a w5w it's a 1.5w the same as they use for the warning lights on the dash

If both rear wheels are off the ground I believe you can but not with just one as the garage said hope it's some help

Second that they're a m6 thread and 8mm head by 20 to 25mm long

The bloke is called Steve Jefferson Extract Engineering mobile 07753618172 Landline 01228 819270 Email [email protected] Hope this helps someone as it's going to help me in the new year

Is this just a land rover thing or have I been misinformed

I'm sorry to say but if they want it they'll take it no matter what added devices you put on it but I have to admit the more you put on they may look for a easier one to take the thieving toe rags