couple of things

Paulmitchell1984 · Jun 12, 2014

does any body know the part number for the horse shoe shaped washer that fits with the front prop to vcu .

also ic got a squeky rear brake, iv tried winding back the adjuster but still it sqeels like hell, how do i stop this? i know with disks and pads you put copper slip on but no idea with drums

thequeenscheese · Jun 13, 2014

Have you tried rimmer bros, or britpart they usually have online catalogues of such

britishwardog · Jun 13, 2014

+1, bought some locking washers for my prop a few months back and I remember they also sold the horshoe shaped washers, can't remember the firm I bought them from though, sorry.

Zippy6971 · Jun 13, 2014

The horse shoe clip is TOO100000 at £2.77 plus vat through britcar it's called prop shaft yoke clip f/l hope this helps

Zippy6971 · Jun 13, 2014

The rear brakes I would strip down and put copper slip grease on all the places where the brake shoes touch the back plates and check the edge of the material if it's squared off file it to a 45 degree angle

Paulmitchell1984 · Jun 13, 2014

cheers zippy, i could find it on rimmer in a kit but not seperately..

brakes are getting stripped this weekend so fingers crossed il sort that

ZDomZ · Jun 14, 2014

If the shoes are britpart ones then I am not sure if copper slip will cure it. Mine squeal like a stuck pig. I am going to replace mine with some better quality ones soon.

Zippy6971 · Jun 15, 2014

You should give the braking surface a rub with some emery cloth to take the shine off cloud also help but I would use britpart for brakes buy decent make some thing like mintex you only get what you pay for

couple of things

Paulmitchell1984

Well-Known Member

thequeenscheese

Well-Known Member

britishwardog

Active Member

Zippy6971

Member

Zippy6971

Member

Paulmitchell1984

Well-Known Member

ZDomZ

New Member

Zippy6971

Member

Similar threads