Search results

Ok, on that basis I think i will use it and save going through the hassle of selling it on ebay and buying 80 Cheers Kev

Hi guys. would i get away with using 75w 90 in my transfer case? Should be 80w 90. I have some from an oil change i didn't do on my Jeep Thanks Kev

I sorted my sunroofs out the same way as others by taking the headlining out and re gluing the corner pieces BUT, i think my main problem was the rear sunroof rubber seal had lifted in the corner so wasn't sealing. More rain water got into the car when it was parked nose downhill slightly at an...

doesn't torqx = 12 point? but you are right 12 pointers.

The socket required is a 19mm torqx for anyone else thinking of tackling the same job.

Hi guys. before i pop down to halfrauds can anyone tell me the size of socket i need to get the front brake carrier off. For the rear it was 13mm torqx but is a lot larger on the front. thanks kev

they may say it smells nice :-) emissions should be low(er)

I realise you have had the compression tested but white smoke out of the exhaust smacks of coolant leak, cracked head or head gasket. Considering what you have gone through so far it may be worth taking the head off and checking it properly.

This may put your mind at ease regarding rolling back on an incline Land Rover Owner :: View topic - Disco 2 auto rolls back on hill when in Drive - normal??? ( I hope the link works )

I too would suggest you make sure the compressor turns off when it should or else your new bags will also explode.

I have just collected my car from the Land rover Indy garage that i use and he doesn't want the job of changing the ace pipes. Anyways i did get a quote for the parts and jeez those rubber seals are expensive. I am now trying to decide on whether to keep the ace system or do away with it...

Thanks guys. I think i will just bite the bullet and buy ready made. I thought rubber pipe of a suitable strength would be a way to go as heavy plant machinery uses it on their hydraulics.

Hi guys. Whilst having the car up on axle stands to replace the rear pinion seal I noticed that the rear ace pipes are VERY corroded. I understand that I can get replacements from Landrover but my questions are can they be made myself if I go and purchase the relevant parts or could a hydraulic...

Before it was stolen i ran a Pajero 2.8 on veg oil and diesel mix. i did it approx 50:50 with absolutely no problem.

Hi all. I have had the srs light on now for several months and just got it to go out. For anyone with this problem, open the glove box and look through to the back you will notice a yellow cable leading down to a connector. Now, all i have done so far is to touch the connector/cable and the...

The SRS light came on when i had a LOT of water coming in due to sunroof leaking. I was hoping that it just needs a reset and that nothing is actually wrong.

thanks for the replies guys. Good to know it can be done, i will contact the stealer ( i also need a srs light reset ) for a price as i don't know anyone with a nanocom and haven't decided whether to get one myself.

Hi all. Can the Disco TD5 be programmed to unlock all doors on one push of the blipper? Thank thee kindly.

I have had this same problem. You can feel everything moving as you would expect but unfortunately what has happened is the cable ( like a bike brake lever cable) has come out of it's slot in the lock housing so the outer isn't clamped anymore and the inner isn't moving enough to release the...

Replacing the harness that the oil travels in can be changed easily. Once you remove the large plastic cover over the engine then the harness is just under the rocker cover.