Search results

Thank you guys. I did just that and managed to get the shade panel out without breaking any of the clips. I think reinstalling I might not be so lucky. How would you recommend to reinstall the new panel? I was thinking of fitting the panel in one runner and then bow it again in the center to...

Hello, Anyone out there knows how to remove the four plastic sunroof clips that hold the sunshade in place? I've already removed the glass panel from atop but don't know how to go about removing the plastic clips that have the metal fastner spread on top... I was thinking of spreading...

I did that already; I swapped another relay in the place of the compressor and no change occurred. The pins on the relays are not discolored, the top plastic housing on some of them are however. Calguy

Yup, all doors and tailgate are properly closed. No burnt smells from the fusebox but the relays do look "old" and show slight discoloration on the top of them. However I haven't taken the fusebox apart. Could there be a problem with it? What should I look for on the internals of it...

Thank you Saint.V8. I will try testing the Orange Wire as you have described. Unfortunately, it's not the pressure switch as I just replaced that today as you mentioned. I'm hoping it's the Orange Wire at this point since everything else has been tested and/or changed! I will report back...

Thank you Saint.V8, I'll replace the pressure switch. Is the Orange Thermal Switch wire bypassed when the eas compressor is turned on by jumping the wires at the relay? Best, Calguy

Hello, I have a '97 P38 that I am working on and have the strangest issue. The EAS Compressor will not power on under normal circumstances as it should. When I jump the wires at the fuse box underneath the bonnet it will kick on. When I send a signal via the functional test on the RSW...

Thanks guys for the help! I've gone ahead and took your suggestions and think I've fixed the issue!:D After reading your responses I went to RAVE and printed out all the information to pull out the door card and lock mechanism and was ready to do the work and thought to myself why not try to...

Got it, thanks guys! I'll try to see if I could just lubricate it. Do you think a new part is required or just some good old lubrication? Thanks again! -Calguy

Thanks guys for the quick responses! Do you know where is the lock mechanism switch? I looked on the chassis of the car for an obvious switch but didn't see anything... Does the door panel need to be removed? Us there another post describing how to remedy this? Thanks ahead of time for the...

Howdie, Not sure if anyone else has experienced this but I figured I ask. I've noticed recently that the interior lights take up to 30 seconds to come on when the rear left hand passenger door is opened:confused:. Not sure why this is the case or where to start... The interior lighting...

Hello, Don't know if this is the entire manual but there's an online version here of RAVE that doesn't require downloading the software: Land Rover Workshop Manuals > Range Rover P38 > Range Rover Workshop Manual - Eng It's free and works like a charm. Cheers, Andy

Hello, The tilt mechanism broke on my '01 P38 and I ordered a new RH side guide rail. I've removed the glass portion and the broken piece but rather replace the broken piece I'm thinking of just replacing the entire guide since no one sells just the piece. Hence, can the guide rail be...

Simple enough, thanks for the reply. So I'll continue to look for a 2001 P38 MK3 satnav to work with my P38 2001. Are the part numbers and corresponding model/year listed anywhere? Cheers, Andy

Hello, First and foremost, thank you for all the help ahead of time! Mine of my questions have been answered by reading the numerous posts of other dedicated members on this site! I have a few questions of my own that I don’t really know the answer to but am hoping some of the more...