Search results

Yep I have washer near enough to original position , marks were vague , I'd say she's close, but kindof stood looking at it after , also those 4 bolts for the plate covering the epb are a $#$#$%^ , not to mention the big plate stopping me reaching them , and the person who rounded them off , thanks

Hi all , well I replaced rear drivers driveshaft but there's still another clank which I've tracked to the rear prop shaft so that's going to be replaced also , my main concern though is I think I've got the camber a bit off , any old fashioned tips to make sure I'm close enough ? Many thanks

The bodge sounds good and shall be tried!!!! the other problem is, well one of the other problems is , rear wheel drivers side , slight movement when pulling tyre , but real annoyance is it's driveshaft/ propshaft has a metallic clicking noise where it joins rear differential when wheel is...

OK thanks for that I thought maybe you could pour in there to tidy the weeping up. So what's the options just replace ? Also would you have any thoughts on why the rear shaft sounds like its tapping steel where it meets the middle housing , almost like there's a stone stuck noise but there isn't

Hi well I think I've found two culprits for noises and vibration , up front I have a significant weep from the diff all along the bottom , and to the rear drivers side the wheel on back has a little play left to right / but not top to bottom and makes a clank noise when rotated where the shaft...

Thankyou il have a look at left front shaft first , would there be much play if it's bad or is it more a visual looking shagged kind of thing if boot looks intact

Hi thanks for speedy replies , it's fine for first few miles but can just start knocking on acceleration , it seems like a shaft , could I remove the front prop and drive and see if that cures it to narrow it down ? I'm definatly going buy Dr tranny and check the wheels for tightness , I'm not...

Hello to all , I have developed a new problem with the discovery 3 , when mainly accelerating and usually when warmed up a little a vibration comes into the front underneath , it's so bad sometimes the dashboard shakes , its hard to say if it's underneath my seat or more passenger front or...

I've 5.7 in and I may take out a little but I'm also thinking as its a bit older a tiny bit more may not be so bad

I'm just relieved I don't have that other filter and appreciate your help

A second oil filter on discovery 3 ? Really ??

Hi is that Miles or kms was thinking the same every 5k kms

All replies very much appreciated between them all I've decided that filling very marginally over the arrow isn't really an issue but i will keep to 5.5 lts next time and take a new reading following morning , which brings me to how long do you guys leave your oil in with normal driving mainly...

I'm on the top ball with the full arrow marked on it , I know I'm only very marginally over and being an 08 it might fill a gap or two , that took 5.7 lts so I'm guessing 5.6 is more or less bang on the arrow , think il drop a pipe in alright a take a little bit out

Hi we recently bought a discovery 3 and it's been great , a few small jobs and I will have to do the dreaded handbrake soon, anyway I went with mobil 3000 and did the oil , first put in the 5 lts and ran it to the filter which I believe is not a great way to do it ,anyway then I started pouring...

Hi all my wife came home in the discovery today and everything seems fine, however a while after her arrival I popped the bonnet and it seems quite hot under there , the slam panel over the front grill was pretty warm to the touch , is it normal for it to get a bit engine room hot under there ?

Connected to Car/ laptop / nearly the field next door

Very funny

Bad start I unpacked the new foxwell today and a blank screen so it has to go back hopefully things get better later

Hi I am in the middle of ordering parts to sort our discovery 3 recently purchased , I haven't hooked up to diagnostic yet but I've noticed the rear drivers side does not settle quite as low as other corners it settles a little high ,it functions as in will go up and down etc , would anybody...