Search results

Hello all, our off road 88 series hybrid's engine was chucking oil out in great quantities from rear crank seal. As the v8 is from an early P6 Auto originally. Pre. 72, I think. It has a "rope" type rear seal in the bearing housing. After stripping off sump pan and finding engine in excellent...

Hello again. Can any of you v-8 lads and lasses out there help me with identifying my latest buy, a series 88 leafer, no reg. Its the engine (obviously not original) that I would like to know more about esp. the output. Eng. no. 425151199. comp.ratio 10.5:1. Ithink its ex P6. but unsure of...

Just to follow up. We had everything correct. The brand new Bosch coil was DEAD.

Had this problem many times with 200 and 300 TDI. The last one ( after changing clutch, master and slave cylinders at customers request) couldn't get a clutch. Traced fault to ecentric pin that connects master cylinder yoke to clutch pedal. Turn pin until clutch pedal at highest setting and make...

Hello again. Removing upper rear suspension arm as bushes shot. Pig of a job. Does anyone know the correct Landrover procedure? We have jacked body up for clearance to remove inner bush bolt.

Thanks for all your replies and help. Still no further on I'm afraid. Now contacted 5 "AUTO ELECTRICIANS" None can help? The wiring diagrams I have with Autodata do not match the colour codes on the vehicle wiring. I now think maybe an aftermarket immobiliser wired in somewhere. I've never been...

Monday morning: Thanks for replies will check now. Had an "Specialist Auto Electrician" in, who only told us what we already knew. If only he was as professional as his website! Will let you Know how we get on. Cheers all.

Think I have uploaded some pics?

Hello all. Can anyone help us? 1998 Discovery 1 3.9. Auto. Engine HRC2411 grossly overheated and of no use. Customer obtained a similar engine HRC241c as replacement. We fitted engine and transfered over plenum chamber ( with sequential gas sy.) Distributor etc. to use original wiring loom...

Help[ needed please. Winchmax 12500. After a 2 hour under (muddy) water soaking the wireless remote operation of my winch has died. The plug-in hand controller works the winch fine. The wireless remotes never got wet and the led lights up when buttons pressed. Any ideas welcome.