Search results

Can't find anyone local to me!

No I haven't got a nanocom! Yeah I need the car, thanks for offer

Update another try at eka again, dash indicator for side lights does flash every time I put the code in, so it's taking the code, but again it's not doing anything!!

Hi, I've been a member for sometime, find the forum very helpful, I have a range rover 2.5dt 1998, looking for some help with a lockout problem. I have owned it for 2 yrs, she has been a good car up until today. Trying my patience now. First thing this morning I tried to unlock my range rover...

Hi can you Gives a location Please.

Hi all still no go :( Have been out today and checked fuel pump and it's working ok. Look at all the wiring and all looks ok. Took one of the plugs out and it looked wet and the petrol did smell stale so put 3 gallon of fresh in :D Tried with the easy start again it did pop back in the air box...

Hi all. I have disconnecting the lpg electrics but it still no go, i will have a look at the plugs and check the leads.:D Just to check is the number one plug is on the right as you look at the engine from the front ?:o thanks for reply

Hi, sorry for delay in my reply, have a lot on with work at the moment. Have been out today and checked the light on the dash, and all ok.:) I have checked the crank sensor which was plugged in, all ok.:) I have got spark to the plugs and fuel to the rail but have not checked the fuel pump yet...

Thanks for your reply, i will have another look for a missing cable. I might have the lpg cables mixed up.

Any1 with any ideas with the following P38 4.6 year 96 I rebuilt the top end of the engine, heads etc. I have put it all back togther, and have come across problems with starting it as the engine turns over but doesn't start.:confused: The leads are new and plugs. I have put the BeCM sync-mate...

:) thankyou :D

OK, thanks 4 your help, no need 2 argue. I'll have another look at rave. TY

Cheers mate, i have rave, but need to know which is which, and the numbers are on which cylinder. sorry but its not that clear in rave. TY

Has any one got a picture or information on how to set up the leads to the cylinders on a gems engine. I have picked up a 96 P38 for spare or repair. I'm on the final tidy up and puting it back together, but the only thing is the leads were off the engine so i'm not sure which way the new leads...