Search results

ahh got it, thanks :-)

Probably a stupid question. I ordered 4 pins for my vents. They are like the ones for sale here. It may be called a Clevis pin, I don't get how install them besides sliding them in. There is no hole for a cotter or split pin, just that slot on the opposite side of the mushroom you see in the...

I believe I found the part number for the terry clips - 334073 or S2-334073 Maybe the 2a 109 did'nt come with the crank handle , I might just have to find a spot out of the way for it.

I bought a new Zenith a couple years back and only put about 40 hours on it since. Well all of the sudden one hot tropical day, black smoke, poor to no idle, no power, poor acceleration, dieseling. I had my brother in law - a mechanic look at it – he was puzzled. I had enough today and took it...

Ok, the clips for the crank handle get attached to some holes behind the mat. I have'nt found the holes but will look and obtain some terry clips. The mat is glued on I guess so I'll have to get underneath to check it out for the place to attach the clips..

Thank you JCS and Oxcide. Looking forward to the pics. I will check out the locations you describe and reply.

Any ideas where a good place to store the engine hand crank? I was thinking maybe there was some brackets that get mounted to one of the side benches. Also I can not find anywhere on the internet a picture of the lid for the tub in the back of a 109. I want to see what kind of hinge and hasp I...

Ok Mad Hat Man, I think your suggestion solved it for me. The float was at 29mm and I adjusted it to 33mm. -I learned something new. Another thing that is working again is the volume control screw. I guess the throttle butterfly flap needs to be cracked open at 1.4mm for idle/start on a zenith...

Thanks all, Mad hat man- What is the proper float leval? Do I just bend the tab that pushes on the needle to adjust? Thanks This morning I checked the float and needle, Checked the mounting base, and replaced the gaskets down there. Put some compressed air and blew any dirt out. Put the zenith...

No, I havent got rave. But I will download. thanx

I have a new zenith IV fitted to a 2.25 petrol. It has been running OK with the exception of hard to start when engine is hot, but now it can not idle. There is thick black smoke from the exhaust. The spark plugs have built up black carbon. I have played with the throttle adjustment screw and...

Got it! Thanks Dopey - Nice picture

Anybody know how to install a part # 587095 -Carb Heat Shield. I bought this from lrseries.com - no instructions came with it. I ordered one becuase I think I fried my Zenith earlier. Anybody seen any pictures around of one installed? thanks

A heat shield for the exhaust- maybe I can just make a custom piece of aluminium sheet metal - would work? I know I can order a heat shield for the Carb online. I might have seen something online for the diesals, a exhaust shield or something. Yesterday I moved the front licence plate to the...

I recently aquired a Series IIa 109' Petrol. I want to know if it is normal for the passenger floor board, bulkhead and steel/aluminium dash to heat up. Sometimes you can not have bare feet on the passenger side. Its steers right handed and I know the exaust pipe is below it, but is this typical...