Search results

Yea leave the o ring off but pack the hole and around the sensor with greas to avoid it rusting in future. As nathan says you can use new sensors but Im not one for replacing good parts if they don't need it, hence me not spending the hard earned on new hubs. The hawkeye is a good buy and I...

First of all you need to correct the issue, easiest method is to remove the front wheel sensors, clean up the hub/flat mating surface between the hub and sensor, remove the o ring on the sensor, pack with grease, reassemble then turn off the lights. That should cure it for good. I was told I...

It's about an hour job tops, buuuuuuut you need to check the bolt on the oil pump gear in the sump that takes a bloody age to do and also change all the oil and filter etc Don't run it or it could run on and blo the engine up, also check the wastage regulator switch thin on the vac pipes from...

If that's tru then I can't imagine it's never been publicised and it's just made every p38 in the land instantly less secure!!! I hope it is true tho in a way cos the dealers won't be able to thieve cash for summat simple

I'm getting P0721 code for the D2 auto. I know it's the downshift safety blah blah blah but I have no idea what it means or what bit to replace. It also seems to stutter between 2nd and 3rd on occasion. I can make it do the first issue but not the second. So any help you guys can...

you bought a thermotop? is it working?

regarding the difference between the petrol and diesel thermotp, there is no phsyical difference, the difference is only in the software on the circuit board, i think ou can alter the speed of the fuel pump in the software but not sure how. if this is the case then there is no such thing as a...

go find a rover 75 diesel and cut em off that, are they the same ones? the 6 pin and the two pin? i know some landrovers, maybe the newer ones have 8 pin connectors

its the full rod thats gone so it will be a case of measure it up i think. i will get the 4 way tracking done tho, had to do it on the P38

Get I touch with omitec and they will upgrade it or send u the upgrade cd

I just ask em if it's needed!! I have never used the handbrake yet on an auto and ain't gonna start now. The park setting on the gearbox is more than enough!!!

i had the td5 mot'd yesterday and got advisories for track rod, both ends and all four drop links. never done the drop links before and only done the full trck rod on the P38 before. any tips? cheers

i have an hawkeye and can reset stuff for you. I'm near ecclesfield in sheffield if its any help.

it will operate when the outside temp is below about 5 degrees c and untill the coolant is circa 77 deg c. it sounds like it could do with a service but provided it is still igniting it should be fine for now. the smoke is just unburnt diesel and it will auto shut down if it doesnt ignite...

PIN 1 +12V PIN 2 - digital W-BUS PIN 3 - analog +12V when ON ( 10-120min ) PIN 6 GND you probably wont need the wbus. i would look through the rave cd for the freelander and see where the plugs/unit should be as quite often there are plugs already installed. if not just wire up as...

make sure it is actually firing up, check exhaust for heat as they can still make a noise when just running the fan

Have you looked at the wheel sensors? I took mine out and removed the o ring, packed with grease, filed the tops/seating surface of the hub to get rid of rust build up and replaced. One side is sound and doesn't fault anymore, the other still faults but I think I need to re file that one.

im just waiting on a code coming through from omitec for my hawkeye. i would hope that someone out there can collate the data from the codes and come up with the algorythim. the problem is obtaining the data from everyone. now if people copuld pm me with that data maybe i can sort it all...

has it got the boot plastics? if so how much? and can you send/post a piccy of them.

i have a pcb on its way to mike in the morning!!! he only charges £44 quid so its not worth making a mess of it!! you can buy a cheap remote off ebay for about 6 quid and solder it onto the terminals on the oval timer. i did that on the range rover!!