Search results

Steering. Hi all. Would putting extra weight in the rear of my 1984 Series 3 FFR lighten the steering any. Regards. Chris.

Thanks all. Think I will stick with Waxoyl. Regards. Chris.

Hi all. is it a good idea to pump expanding foam into the Chassis of a 1984 Series 3 ?. Regards. Chris.

Hi. Are the Starter Brushes interchangeable on a 12 volt and 24 volt system. Regards. Chris.

Thanks. I will have a look on their site.

Great. Many thanks.

Hi All. Can I use 12 v Ign Points and Condenser in a 24 v FFR Ignition System.Also, are the 12 volt Starter Brushes compatible with the 24 volt Starter Brushes. Regards. Chris.

Not sure, would imagine that the springs would compensate by pressing the shackles towards the rear thus lowering the height.

About 2 years. Have heavily loaded it with bricks and drove it for about a week like that. Made no difference.

Thanks. I am trying to lower the rear of a 109 FFR by about 2" after fitting Parabolic Springs all round. 2 Leafs on both Front and Rear. Kept original Shocks. I have already replaced all the Extended Skackles for standard ones with little change. Thought SWB on Rear might do the trick. Still...

Hi all. Would anyone know what is the difference in length of the rear shackles on a Series 3 LWB and a SWB. Also, will the SWB Shackles suit a LWB. Regards. Chris.

Thanks, this is the basic information I am looking for. I will give it a try during the week and keep you posted.

Its a Wolfweld 25 -130.

There is a Speed Knob and 4 Power Settings, Min, Max, 1 and 2.

yes. flux core.

Hi All. I have just purchased a new Wolf 130 Mig Welder. Could anyone recommend the setting I should use to weld on sections of 2mm Steel. I have tried various settings already, however, none seem to be very good. Also, one uTube video suggesting welding without the Shroud covering the Tip. Is...

Yes, its a bare chassis. I have removed the loom and left a draw wire. I am also replacing the Shackle Bushes in the Chassis.

Thanks.