Good quality Swivel Balls???????

landy-lee · May 31, 2021

Good afternoon to you all

So i am just about buy new Swivel Balls and i want to make sure i buy good quality OEM manufactured ones and not crap pattern ones.

after a lot of research after seeing a few photos of broken swivel balls on the tinterweb i believe OEM made in Turkey are the ones to go for as genuine LR are twice the price!!

I found this report done by the military very interesting and helpful

So before i buy i was just wanting your guys input on what you have fitted.

Have you fitted pattern ones that has made in Turkey on the box?

frog hopper · May 31, 2021

I used the Britpart kit supplied by Paddocks, been on around 5 or 6 years and 20k miles with no problems so far. In fact gave them a quick once over last week while doing the fluids, no marks, no fluid leaks - mind you that could be down to the use of one shot grease.

tottot · Jun 1, 2021

One shot grease will come out almost as quick as oil if seals are rubbish and the axle is warm.

payydg · Jun 1, 2021

landy-lee said:
Good afternoon to you all

So i am just about buy new Swivel Balls and i want to make sure i buy good quality OEM manufactured ones and not crap pattern ones.

after a lot of research after seeing a few photos of broken swivel balls on the tinterweb i believe OEM made in Turkey are the ones to go for as genuine LR are twice the price!!

I found this report done by the military very interesting and helpful

So before i buy i was just wanting your guys input on what you have fitted.

Have you fitted pattern ones that has made in Turkey on the box?

View attachment 239494

I’ve always used britpart ones and they’re still dandy 10yrs later

landy-lee · Jun 1, 2021

payydg said:
I’ve always used britpart ones and they’re still dandy 10yrs later

From what i see in some photos i have seen i think wheel spacers have alot to play in them braking

Brown · Jun 1, 2021

One thing a few people have found on here (including me) is that there are a batch of swivel balls knocking around where a bit too much meat has been left on the interior and they foul the outer casing of the CV joint. I had to open mine out a little with a die grinder to get the full range of movement without binding.

payydg · Jun 3, 2021

landy-lee said:
From what i see in some photos i have seen i think wheel spacers have alot to play in them braking

I can imagine. I try and keep a list of what parts are acceptable from britpart/bearmach etc and which I buy from a specific manufacturer or which LR brand. I don’t always think that just because it’s a brand and expensive it’s better, although it often is!

payydg · Jun 3, 2021

landy-lee said:
Good afternoon to you all

So i am just about buy new Swivel Balls and i want to make sure i buy good quality OEM manufactured ones and not crap pattern ones.

after a lot of research after seeing a few photos of broken swivel balls on the tinterweb i believe OEM made in Turkey are the ones to go for as genuine LR are twice the price!!

I found this report done by the military very interesting and helpful

So before i buy i was just wanting your guys input on what you have fitted.

Have you fitted pattern ones that has made in Turkey on the box?

View attachment 239494

love how much detail you’ve gone into. Where is that document from?

BikerB · Jun 3, 2021

I managed to get a couple of genuine originals, they will end up costing about £175 each by the time they arrive but at least they should last.

landy-lee · Jun 4, 2021

payydg said:
love how much detail you’ve gone into. Where is that document from?

Hello mate

I got the doc off here. I found a thread where someone had similar concerns

Good quality Swivel Balls???????

landy-lee

Well-Known Member

frog hopper

Well-Known Member

tottot

Well-Known Member

payydg

Well-Known Member

landy-lee

Well-Known Member

Brown

Well-Known Member

payydg

Well-Known Member

payydg

Well-Known Member

BikerB

Well-Known Member

landy-lee

Well-Known Member

Similar threads