Diagnostics,

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hammym

Hammym

Member
Posts
31
Location
Southampton UK
I have just replaced my diagnostics plug, my code reader doesn't power up, the fuse in the main fuse box is OK. Are foxwell code readers compatible with 2001 discovery td5's? If they are does any one know of any other fuses or relays that may need replacing that would prevent the code reader from working. I'm positive the new plug is wired correct, I'm grateful for any help, thanks.
 
Foxwells are compatible with all except maybe the most recent Land Rover and Jag vehicles and will work as an OBD2 reader on any vehicle as well. Which is why I got one!;)
 
Hammym said:
I have just replaced my diagnostics plug, my code reader doesn't power up, the fuse in the main fuse box is OK. Are foxwell code readers compatible with 2001 discovery td5's? If they are does any one know of any other fuses or relays that may need replacing that would prevent the code reader from working. I'm positive the new plug is wired correct, I'm grateful for any help, thanks.
Click to expand...

I would be checking you have the pins in the right sockets on the plug, dont assume what was there before was correct!
It only takes one pin to be pushed partly out and the diag kit will not connect.
 
That's odd, my one is supposed to be a nt530 but I can't see it written anywhere on it. It sometimes lets you see errors but can't delete them. Sometimes it won't work at all on the D2.
It does always work on the l322.
 
Just looked at mine & your right no mention of the model on it but there is on the box it came in !
20210425_212237.jpg
 
Andy Warren said:
The picture on the box it came in says NT530 under the screen, do you think some in China is making a rip off copy of something that's err Made in China:):):)
Click to expand...
I imagine that is completely possible.
But if someone with a 530 pops on he/she could confirm whether or not there are any differences. In what is printed under/on the screen.
 
My extremely older Foxwell NT-510 works on my friend’s TD5.
You have to use ‘Manual selection’ and not ‘Automatic selection’ to select the Discovery 2 year.
 
You must log in or register to reply here.

Similar threads

S
The four amigos and fault 85
Replies
2
Views
244
Spuddo
S
J
Rear sunroof issues
Replies
6
Views
466
Jrichards6
J
M
Discovery 4 - Limp Mode Cold Start Manifold absolute pressure issues
Replies
2
Views
403
Graculus
Graculus
L
Help discovery TD5
Replies
8
Views
1K
Shedload
S
B
OBD 2 Compliant Fault Code Readers
2
Replies
21
Views
2K
Stanleysteamer
Stanleysteamer
Back
Top