P38A Drive shaft half shaft

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

pete12345

Well-Known Member
Full Member
Posts
2,427
Location
Isle Sheppy
On the long side there’s a cir clip and a spacer type thing but on the short side no cir clip or spacer got the cir clip with the new cv joint but no spacer I’ve it’s supposed to have one on the short side does anyone know the part number I’ve looked on my copy of rave but can’t even find the page let alone the spacer thanks for advice
 

Attachments

  • image.jpg
    image.jpg
    241.6 KB · Views: 90
Just did mine too. This is the long side, and its "spacer/retainer". Can not confirm if there is one on the short side.
IMG_1514 - Copy.jpg
 
Thanks been in touch with suppliers they seem to agree they are obsolete now I’m sure mine hasn’t just fallen off I think there not on the short side
 
I’ve found this for a defender just checked my long half shaft they are exactly the same diameter and with I’ve you need some
 

Attachments

  • image.jpg
    image.jpg
    390.8 KB · Views: 101
IMG_20201010_154935.jpg
looking at this short side, it looks like the shaft of another model with and adaptor on it?
IMG_20201010_154938.jpg
made for the job I think.
IMG_20201010_155436.jpg
IMG_20201010_155440.jpg

Spacers in both sides if this is the place. These could be original?
 
Back
Top