Hi, my old Snap-On Solus Pro has a Land Rover port (LR1) that plus in to my cars diagnostic point but, the screen says there's no power from the vehicle so it can't work. I can't find a picture of a 'live' one anywhere, I think I've managed to put pictures of mine on. Any ideas what's missing or how I get power to it to do a diagnostic check
Thanks in advance.
Soft dash 1994 3.9 Auto - diagnostic port
- Thread starter peanuts01
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Have you checked all the fuses?
Datatek
Well-Known Member
- Posts
- 43,926
- Location
- Near Poitiers SW France
The plug half of he connector looks to only have one wire in it, so that is not going to work.
mikieman
Well-Known Member
- Posts
- 332
- Location
- United States
The Range Rover diagnostic port on the Range Rover classic is behind the passenger seat in the USA
So in the UK it must be behind the drivers seat...
So in the UK it must be behind the drivers seat...
mikieman
Well-Known Member
- Posts
- 332
- Location
- United States
this is it
mikieman
Well-Known Member
- Posts
- 332
- Location
- United States
Didn't see it behind the drivers seat but I will have another look. The above pictures show the lead that goes back on itself and the plug in port I found has 3 wires, not 2. The snap-on kit plugs in to the one with 3 wires when you un-plug the one with one wire, which makes a circuit for ? I've checked fuses but, it's worth doing another check, I know what I'm like LOL
mikieman
Well-Known Member
- Posts
- 332
- Location
- United States
The green wire is a retaining wire so you don’t lose the cover / cap
I use the Hotwire diagnostic..
It has another name...but I’m haveing a brain fart...
I use the Hotwire diagnostic..
It has another name...but I’m haveing a brain fart...
mikieman
Well-Known Member
- Posts
- 332
- Location
- United States
Rovergauge..
Is what I use
Is what I use
Western Slope Rover
Well-Known Member
- Posts
- 3,724
- Location
- On a mesa
Where did you get it and how much, if you don't mind?
mikieman
Well-Known Member
- Posts
- 332
- Location
- United States
It is on eBay and there are videos out there...I paid in the 40.00$ Range
This is the title on ebay
Range Rover Classic, TVR, Morgan, Lucas 14CUX "hotwire" diagnostic cable kit.
It comes with the software... you can also download it from internet...
Runs on a laptop
This is the title on ebay
Range Rover Classic, TVR, Morgan, Lucas 14CUX "hotwire" diagnostic cable kit.
It comes with the software... you can also download it from internet...
Runs on a laptop
- Posts
- 3,255
- Location
- Near Heathrow.
Do these help:
Western Slope Rover
Well-Known Member
- Posts
- 3,724
- Location
- On a mesa
Thanks. Now, in Britlandish ...Cheers!
OK, many thanks, ordered the 'hotwire' so lets see (hopefully) what happens when i plug that in, ever the optimist. Wiring diagrams are fantastic, however, being a simpleton, I can't read them but, at least it shows where I'm looking is the right connector (its' that damned optimist again). It's on my friends farm so I won't be doing it today and, I also need to get it running again first see 'Central locking cock-up' post/thread. Cheers.
