Ideas for Exhaust mods
- Thread starter Paul.G
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Type approval where
New Member
- Posts
- 9
- Location
- Essex
Custom car magazine from the 1970 can’t say I ever seen a Land Rover or Range Rover
Have seen them coming out of the bonnet at Santa pod oooo yhaa
Have seen them coming out of the bonnet at Santa pod oooo yhaa
Am I allowed to ask why? You can get "custom" off the shelf high exit side exhausts which come out half way up the rear tub behind the rear wheel (link) but for what you are thinking I would have thought it will be a custom build.
Just that I have bent, crushed or snapped so many rear pipes on various landy's, plus it would be different, I was thinking about the one in your link but connected to the front pipe coming out behind the passenger door, I just want to see if anyone has done similar before I start cutting holes
- Posts
- 14,902
- Location
- Doncaster
Mine's short but sweet .. 
I just chopped it up and welded where it needed putting back together. All the bends in it are mostly from parts of the rest of the original system. It's straight through but doesn't seem too loud .. even silenced it's more the pitch that you hear and that stays about the same, rather than the volume. When I first did it I didn't have the flexible part in and it all vibrated horribly. Since I put the flexy in, it just works ..
I just chopped it up and welded where it needed putting back together. All the bends in it are mostly from parts of the rest of the original system. It's straight through but doesn't seem too loud .. even silenced it's more the pitch that you hear and that stays about the same, rather than the volume. When I first did it I didn't have the flexible part in and it all vibrated horribly. Since I put the flexy in, it just works ..
tottot
Well-Known Member
- Posts
- 7,459
- Location
- west wales coast
Just that I have bent, crushed or snapped so many rear pipes on various landy's.
---------------------------------------------------------------------------------------------------------------------------
I chop off the last 4 inches of the tail pipe so it does not stick out past the wheel.
Hows this for a daft idea ? Weld an elbow on the inside of the chassis outrigger tube and divert the exhaust through it to the side.
So you get black soot up the side of the car and mud all up the side from the sticky out tyres?
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
the only issue i have had with my standard position exhaust at the back has been in deep mud, and reversing backwards when stuck. Never blocked it completely but twice the tailpipe has been half blocked. I cant be faffed to change it from stock.
I persoanlly think side exit looks weird.
I persoanlly think side exit looks weird.
- Posts
- 21,137
- Location
- In the next Glen
I have a side exit on my 90 & its dam loud but everyone seams to like it plus I don't
get any black soot on mine...……….
get any black soot on mine...……….
300bhp/ton
Well-Known Member
- Posts
- 4,733
- Location
- Near MK
Side exit on my brothers Tdi. Works well, but does make it louder in the cab.
This is kind of how I was thinking Paul, do you get any blowback when at traffic lights?Mine's short but sweet ..
I just chopped it up and welded where it needed putting back together. All the bends in it are mostly from parts of the rest of the original system. It's straight through but doesn't seem too loud .. even silenced it's more the pitch that you hear and that stays about the same, rather than the volume. When I first did it I didn't have the flexible part in and it all vibrated horribly. Since I put the flexy in, it just works ..
This looks neat but does it still have the back box on, any pics underneath to see how you have done it?
- Posts
- 21,137
- Location
- In the next Glen
