Recent content by Zebravanman

So first off it's a coolant feed line to the turbo and not the return line so sorry about that. Anyway I used the coolant pipe outlet from the thermostat which goes to the heater, I cut it and pushed in a T piece the used the reduced T and connected it via a length of suitable coolant hose to...

Sorted !! Rooky error, the hi and ref lines were connected around the wrong way coming off the dpf. Hi was connected to connector furthest away and ref was connected pre dpf.....this was the wrong way around. Hi goes pre dpf and ref post dpf....well all fixed now

Ok thanks I can check that, do you know what wire colours to pin out with the dvm

Yes they are good and in tact no splits

Hi I have a restricted performance o my 2.2 diesel 2012. Icarsoft v3 says its a p2456. I've checked the hoses and they are in tact. I removed the dpf and had it professionally cleaned on a machine which guarantee 98% clean so it's not sooted up. I also checked the dpf values and it's stuck on...

Ok thanks for that, should be no issue finding a return , I wasngoing to connect in between the heater return and egr cooler input via a metal T piece.

OK here goes my first post and I need help from you guys. I have swapped over a range rover evoque 2.2 engine for a freelander 2 engine as the evoque went bang. The freelander engine was bare so I had to swap all the ancillaries over. It's all gone well except for one thing, the turbo coolant...