Recent content by yub

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Y

    poor running

    Hi all my 2 1/4 diesel has started to cut out when going up hills, it starts again with a bit turning of the engine. Then play's up again on any incline. could this be as simple as the fuel filter? i did open the water drain plug on the bottom of the filter housing, there seamed to be a delay...
  2. Y

    brake servo

    Hi mine is an early series 2a/3 1971, and i asked the question cause i was looking at the haynes manual and they stated that not all early series 3 where fitted with a servo, so didn't know if mine was meant to have one.
  3. Y

    brake servo

    thanks Fenby 1976 i should have added to the original post, it is a series 2 chassis, with a series 3 safari body, and converted to diesel, the servo does not have anywhere to get the vacuum from (so i think it has never worked) so this is why i asked the question. but thanks again fenby for...
  4. Y

    brake servo

    So is that a yes or no? it has been running without it fora while.
  5. Y

    brake servo

    Hi all this maybe a stupid question, but my series 3 failed it's MOT on a couple of things one being the brake servo not working, can i just remove it and do away with it, and will it then pass the MOT? cheers
  6. Y

    series 3 diesel starter motor

    Cheers i,ll have a look and see if i can get one.
  7. Y

    series 3 diesel starter motor

    Hi all does anyone have a starter motor for a series 3, 2 1/4 diesel, they could sell me? cheers
  8. Y

    welder needed

    Hi all is there anyone in or around the Edinburgh area that could do some welding on my landy (without charging the earth)? I think it need's some patches on the chassis and the passengers footwell, for MOT. cheers
  9. Y

    michelin tyres

    another question on these tyres - are they directional?
  10. Y

    fairey o/d questions

    Hi all couple of questions re fitting o/d. firstly i have the o/d on the bench should i be able to rotate the protruding gear by hand? and secondly can i use the bolts that hold the transfer box cover on, to hold the o/d on? cheers stuart
  11. Y

    michelin tyres

    Hi Does anyone have any experience with Michelin XCL tyres? And would they say good or bad tyre? cheers
  12. Y

    wanted series 3 wheels

    Hi Mike send me some pics if you can, i was hoping for just wheels, but i'll have a think about it (i need to consider the drive upto you). cheers Stuart
  13. Y

    wanted series 3 wheels

    Hi has anyone got a set of series 3 wheels, i just need the wheels to refurbish and fit new tyres to. cheers
  14. Y

    second row seats

    HI got a set of second row seats from a series 3 station wagon, and one rear bench seat with back cushion, but no base cushion, fair condition. any good to anyone? cheers
  15. Y

    wanted overdrive

    Hi does anyone have an overdrive sutable for a series 3, for sale? cheers
Back
Top