Recent content by welshlandy

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. welshlandy

    Series 3 300tdi conversion

    No. But the viscous fan is being removed.
  2. welshlandy

    Series 3 300tdi conversion

    Ok thanks, . Yes its going in a series 3 109' 2.25 petrol. . So as I understand, leave the fly of the 300tdi in place, and use the series 3 clutch. Its a standard series 3 gear box by the way .
  3. welshlandy

    Series 3 300tdi conversion

    What flywheel and clutch do you use ??
  4. welshlandy

    Possibly interesting info regarding VE pump and DTI gauge

    So have you put a maestro pump on a 200tdi engine?
  5. welshlandy

    Bubbles in rad

    Thats what I did col. Luckily because the engine did stop, thats when I adjusted the valves. But thanks, tip like that are always welcome.
  6. welshlandy

    Bubbles in rad

    So I took off the the rocker cover and first thing I noticed was number 4 valve sitting up and no valve cap on. The push rod could not have been seated properly, stopping me turning the engine by hand, so when I adjusted the valves I set it to the wrong point. It must have popped in place when...
  7. welshlandy

    Bubbles in rad

    Yes. It sounds like its blowing
  8. welshlandy

    Bubbles in rad

    Ok ,so I had my head skimmed, had new valve guides fitted, had the valves re ground, had it pressure checked. Now ive put the valves back , with new stem seals. When I give the head to the auto engineering place, the valves were in order 1-8 from rad to bulkhead. When I had it back they were 8-1...
  9. welshlandy

    Bubbles in rad

    Ok thanks. No the valve guides wouldn't cause this to happen, its just something I've noticed since taking it apart. .g
  10. welshlandy

    Bubbles in rad

    Iv always put antifreeze in. Anyway to stop it. ?? Looks like i need 2 valve guides. How do you get them out of the head. It's all stripped down on my bench. Just need some advice
  11. welshlandy

    Bubbles in rad

    Im suppose to be going out on the lanes tomorrow.do you think it would be ok to use.
  12. welshlandy

    Bubbles in rad

    Hi all. I've got a 200tdi in my series 3 . Im using the series rad,and a separate oil cooler. I've noticed some brown/rusty water coming out of the top of the radiator , and when I opened the radiator up the water was brown. When I started the engine there were lots of bubbles... im I right in...
  13. welshlandy

    Ex military 90

    Were the 2.5 n/a any good . My friend has seen one for sale , but it has a top end noise, easy fix ??? Thanks
  14. welshlandy

    Ex military 90

    What engine did the military use in the landrover 90. Was it
  15. welshlandy

    Oh yeah: Crisp winter and logging.

    Friend of mine has got a battery powered chainsaw . Very quiet.
Back
Top