Recent content by splutter

Fitted 2 front galvanised door bottoms and a rear safari door already Glazed without any problems, left them just a nice clean alloy finish with a coat of clear coat ( lacquer) over the top

Cheers BruceB. I'll give it a couple of days and see if he reads the thread, then I'll maybe try to make contact

Hi, Yes got the puller, big trolly Jack axle stands and everything else, might try the Doc to see if he can give me some anti spinning pills. lol!

Are there any fellow Landy enthusiasts in and around Ayrshire that could help an old Guy change his steering box. I can do the job but at the moment suffer from vertigo and when I roll out from under the vehicle the world is spinning like there is no tomorrow. Got all the tools to hand, + tea...

A bit late in the day I know but just a way of diverting the water

I know its a bit late in the day but just thought I'd let people know it can be done! Just in the process of fitting an electric fuel pump to my 109. Knocked up a bracket to mount an SU ( puller type pump ) in the engine bay, same type as fitted to the old Morris Minor, I chose this SU AUA66...

I know its a bit late in the day but just thought I'd let people know it can be done! Just in the process of fitting an electric fuel pump to my 109. Knocked up a bracket to mount an SU ( puller type pump ) in the engine bay. same type as fitted to the old morris minor discard the original...

Fitting a new steering relay to your series Landy Just be aware that the new relays that you buy today will be a slightly smaller Diameter than the old one you take out. Todays New steering relays are a slightly smaller diameter than the old originals, so fitting at the top with the 2 bolts is...

Todays New steering relays are a slightly smaller diameter than the old originals, so fitting at the top with the 2 bolts is fine that will hold it in place but at the bottom the relay will be a slack fit in it's collar so a new smaller diameter collar needs to be fitted to stop the relay from...

Todays New steering relays are a slightly smaller diameter than the old originals, so fitting at the top with the 2 bolts is fine that will hold it in place but at the bottom the relay will be a slack fit in it's collar so a new smaller diameter collar needs to be fitted to stop the relay from...

check timing belt unless you know when it was last done should be done every 60K ( I do mine every 50K ) Air,oil and fuel filters are cheap enough from Paddocks even if you buy the genuine Land Rover Oil Filter ERR3340 As far as Oil goes a good 15/40 mineral oil will be as good as any, the 300...

I'll agree with that GB Spring 01214271314 is the Number if you need it. I've just bought another set for my latest S3 and all for a fiver under £300 delivered, come complete with bushes etc...........Buy cheap you'll get crap. Paddocks will sell you a set for £278.40 but they are not British...

Just been readng your threads about the SRS and if it can be removed. One thing I have learnt is that I think mine only has the steering wheel bag as on the passanger side there is the grab handle present, same as on my last disco 1 which had no SRS. I should have kept it but it was a 5 door and...

******************************************************* Did you ever get it fixed>> I know its a bit late in the day but I just had the same sort of knock from mine and it turned out to be the serpentine belt tensioner was loose ( not the nut holding the bearing) the nut holding the unit to the...

Just a bit of usefull info. Series 2 and 111 door tops...... well I tried Paddocks and ended up sending them back as the fit was four letters starting with C and ending with P....... Now maybe I just got a bad pair made as the shift was ending, I don't know. I thought I'll buy British so...