Recent content by sp3k3y

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. S

    abs sensors

    hi, thanks for the replys. i can not read the fault codes as the OBD socket has decided it no longer want to be friends. jacked the car up and spun the wheels got a fluctuation of about 100 ohm. took the car for a spin and now when i put my foot on the brake the abs kicks in and judders the...
  2. S

    abs sensors

    hi, i am having problems with the useless freelander, it is a 1.8 51 plate. it is showing the 3 amigos so far i have replaced break light switch, checked all wiring to the hdc, and checked all fluids. no problems there. decided to remove the sensors and tidy them up. before replacing the...
  3. S

    vibration on 1.8 freelander

    i have had a bit more off a play today. seems the n/s drive shaft has a lot more play in it than it did about a week ago. the complet prop shaft was remove in one piece. will replace drive shaft and see what happens.
  4. S

    vibration on 1.8 freelander

    hi, i have a very bad vibration coming from my freelander, thought it was the propshaft so removed it, problem still persists. it only happens from about 40mph onward. the ird was replaced december. i have recently had the wheel balance done, all fine there. it has just been in to have timing...
  5. S

    freelander 1.8 clutch

    driving home today my freelander started to whine quite louldly when not accelerating and make a horrible thumping noise. pretty sure it was the clutch as it had that burning smell but would it cause damage to any other part as i dont want to do the clutch and find something else is gone. any...
  6. S

    freelander 51 not starting

    i have tried the inertia switch to with no avail. the key fob was opening the doors after a while but now does nothing. so im thinking a new key fob is in order.
  7. S

    freelander 51 not starting

    it just wont start when i turn the key. the dash light up but thats it. replaced the battery in the key fob twice and replaced the starting switch still no luck. it seems like the immobiliser doesnt switch off. is there any way off finding out without dragging to a garage? or anything else that...
  8. S

    wheel bearings

    front nearside wheel bearing had packed up on my 02 freelander. i am after some advice on doing this job myself. if its easy enough?. does it need to be pressed out and back in?, and is there anything else to be weary off
Back
Top