Recent content by sejo_tt

Thanks Nodge68.

Hi just curious, what's the difference between the injectors for manual and automatic, for instance what might be the possible outcome if you mix the manual with automatic.

Thanks for your advice ( HD3, GrumpyGel and Arctic2 ) will look into it again thanks.

Hi All, I have to change a damaged injector but I am seeing two types when looking for the replacement, can someone guide me on the correct one. My engine : 2.0-litre I4 BMW M47 diesel (2001–2006), badged as 'Td4' What I am seeing: 1: LANDROVER FREELANDER 2,0 td4 82/80kw 0445110049 7785983...

Thanks will start trouble shooting with the switch.

Hi thanks for the replies, but the engine is turning over and I have electrical power. it will turn over but just will not start.

Good Day All, My TD4 Freelander 1 has an intermittent starting problem, the problem is sometimes when I switch on the ignition the cooling fans come on at high speed, the vehicle can be cold when this happens and when this happens the vehicle will not start, the work around is to switch off the...

Thanks for your informative guidance i will try and get more data on the brands I have available to me here and see what's my best option again thanks.

No Caribbean Trinidad

Thanks teddwood1 was hoping it was just the oil but when i saw the slight leak I started to think about the seals but i will still do the oil change first, also has anyone used these oils or heard of someone using them I have two different shops saying they work and they have used them with no...

Sorry for the delay but no the engine was not running, I only read your write up on the procedure after, right now its parked up for the coming week so I can get the oil and do a oil change following the steps in your write up, Thanks again.

Thanks for the link and advise Hippo on one of my bottles it say's, 1 U.S quart 946ml and what I drained was more than one of those bottles,also is there a alternative oil can I use.

Thanks.

Ok checked the adjustment control cable and it's good, next I started the vehicle and brought it up to normal running temp did not have a temp meter so it took a couple minutes then checked the oil level after making sure it was the right plug I was undoing, now i believe there was too much oil...

Thanks for the help and advice will be checking over the weekend.