Recent content by sarstad
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
S
So just finish with it and found the fault
The switch have a clock an a data wire that it use to communicate with the ecu .
The to wire have are split right under the connector in the foot weld under the pluck ..
They were coroadet and need a fix :)
It is all great again ..
Thanks for the...
-
S
okay :)
have you ever tried to measure on the weir there goes into the switch
-
S
is that ECU the BCEM ot the EAS ECU ..
the car has bil sitting and nor rund for about 4 years :)
when I get home I will check the pluk in the foot well
-
-
S
No that I haven't check .
That I will do leader today ☺️
Is it on to right hand site ore the left
-
S
I run it over tomorrow..
Yes it is odd
If I pull the plok out an back it will change one light down
-
S
hi an merry chrisms
I have a odd problem with my eas switch in the dash..
when I change right height the car dos it as it shout but the light doesn't change..
any idea's ?
I am thinking faulty switch
-
-
S
found the fault :)
it was the wier (WR) between the body computer and the fuse box :crazy_driver:
-
S
it starts and run when i jump it :crazy_driver:
-
S
then i ville test the ignition switch tomorrow.
great thanks
-
S
but witch one relay 16 Works
-
S
i have bin starting fine on the key until about 14 days ago .
then it began to wait haf a sek ant then turn the engin when when i turend the key .
i have changed the starter and bat and it have bin running fine fore about a week . then today it dident chrank :mad:....
i can tuen...
-
S
Tryed and stil not working:(
I have tryed the rave solutions through
-