dse will not cranking

Datatek · Jan 20, 2014

Burnt fuse box, dodgy relay, or ignition switch. When you jump the relay, does it start and run?

sarstad · Jan 20, 2014

Datatek said:
Burnt fuse box, dodgy relay, or ignition switch. When you jump the relay, does it start and run?

it starts and run when i jump it :crazy_driver:

Datatek · Jan 20, 2014

sarstad said:
it starts and run when i jump it :crazy_driver:

So, as I said in my previos post.

wammers · Jan 20, 2014

Put a meter set to voltage between pins 1 and 2 on relay 16. Turn ignition to start position you should get 12 volts. If you do, the relay is duff.

tomcat59alan · Jan 20, 2014

Ah bugger it, I ville have another drink

sarstad · Jan 22, 2014

found the fault

it was the wier (WR) between the body computer and the fuse box :crazy_driver:

tomcat59alan · Jan 22, 2014

sarstad said:
found the fault

it was the wier (WR) between the body computer and the fuse box :crazy_driver:

Well done, I will have a drink on your behalf tonight

sarstad · Jan 22, 2014

tomcat59alan said:
Well done, I will have a drink on your behalf tonight

take to mate

..