Recent content by rover86

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. rover86

    Classic Injector removal

    Hi guys, (if thats still allowed). Do I need to remove the scuttle panel to extract Nr 4 injector from a 300tdi in a 94 range rover classic.? or is there a simple way to get it out without bending the scuttle , which looks like someone has in the past. Couldnt find a reference to this in the...
  2. rover86

    Classic 300 tdi timing

    Hi guys, I am just changing the front cover on a 300 tdi so although the timing belt has only done 27K km it is over 6 years old so i am changing it.. Im struggling to find the marker on the flywheel, the woodruff key on the front of the crank is at 5 to 12 instead of 12 o clock when the cam is...
  3. rover86

    Classic 1994/5 RRC central locking

    Location: S/W France Hi guys, central locking problem, car is LHD soft dash, drivers door locks & sets alarm, passenger door locks & sets alarm. The key fob has never worked properly so I dont use it. It all worked locking all dors from driver side until I replaced the lock cam, then it worked...
  4. rover86

    Classic Key fob problem

    Thanks guys, when unlocking with the key one of the rear doors sometimes needs a second lock & unlock, must be that. Cheers.
  5. rover86

    Classic Key fob problem

    Hi guys, after 3 years of locking the doors with the key I decided to invest in 4 new batteries for the key fobs. One flashes the ir light when the button is pressed, but when used to lock, the doors lock then immediately unlock, the other fob only flashes the ir light when I take the cover off...
  6. rover86

    6-Wheel Drive Discovery II - Am I totally mad ?

    Its not you Dave, its me. lol.
  7. rover86

    td5 engine change

    No probs, just thought it may have been near the price of a replacement engine here. My 300tdi RR had a new engine & box fitted before I bought it 3 years ago & I have invoices for 11800 euro for the box & 11250 for the engine. Now you know why the french have a garden full of relics, cheaper to...
  8. rover86

    6-Wheel Drive Discovery II - Am I totally mad ?

    Is the map of the electrics available in english ?? lol. Very impressive build, but after mechanics the electrix are moon dust to me.
  9. rover86

    td5 engine change

    I have a disco 2 Td5 2002 adventurer 7 seat, 102k miles, boite auto, CT neuve, air suspension, toutes options. for sale in Poitau charente, 3500 euro. Drives perfect, but RHD, conduite a droite. If this is any good for you.
  10. rover86

    td5 engine change

    I have a RHD 2002 Td5 disco 2 for sale in Poitau charente if any good for you. It is the adventurer 7 seat all the toys fitted standard including front light bar & steps. 3500 euro. 102k miles.
  11. rover86

    RRC 3.5 EFI ignition module

    Cheers for that, connector all wired, off out to fit it now, fingers crossed.
  12. rover86

    RRC 3.5 EFI ignition module

    I have just recieved an all makes ign module which screws to the dizzy on a 3.5 efi. the old one has 2 pins, the new one has 3 pins numbered 1, 2,3. can I presume that pin 1 is live from the coil, 2 is to the coil & 3 is earth? Has anyone used one of these, I don't want to connect wrong &...
  13. rover86

    V8 ignition wiring efi/electronic

    Thanks for your help, I must try harder, still no spark. might try a new black box gizmo on the side of the dizzy.
  14. rover86

    V8 ignition wiring efi/electronic

    Hi guys, I've just bought a '87 auto to restore but a few bits were missing. I have read through previous threads & am still confused. I am auto-electricaly dyslexic. From the dizzy black box I have 2 wires White & white/blk. From a relay on the inner wing a white/blue. on top of the alternator...
  15. rover86

    What engine is this?

    The center spindle does lift up & down, not sure if it will drop any further, will have a look this evening, I didn't remove the rotor. or the alternator & coil, leaving a bunch of wires looking for a home, but that's another job. Many thanks. Well I got the distributor out & when I pushed on...
Back
Top