RRC 3.5 EFI ignition module

I have just recieved an all makes ign module which screws to the dizzy on a 3.5 efi. the old one has 2 pins, the new one has 3 pins numbered 1, 2,3. can I presume that pin 1 is live from the coil, 2 is to the coil & 3 is earth? Has anyone used one of these, I don't want to connect wrong & destroy the new module. Thanks.

I found this on another forum...

You need to make up a new lead, as the connectors are different.
The 3 wires are

coil negative, earth, and coil positive/live supply. (The 2 wire module earths through the distributor body.)

The same module is fitted to the Ford Escort etc. of about 1990 vintage, you could whip one and its lead out of a Ford.

Don't disconnect out the black/white lead that goes from the coil via the relay on the passenger side, by the air filter, to the ecu, or the fuel injection will stop.

Cheers for that, connector all wired, off out to fit it now, fingers crossed.

rover86 said:

Cheers for that, connector all wired, off out to fit it now, fingers crossed.

Click to expand...

Joy? No joy??