Recent content by roger01

Thanks for the input guys, yes I checked the loom from door out station to the plug behind the front door post in the drivers foot well and then on from the corresponding socket to the BECM using a 10w bulb as a series load and everything was fine, did all this when I suspected broken wire or...

Hi back again, as mentioned earlier operating the unlock switch and the indicators flashed, operate the lock switch and nothing, swapped the wires over on the door switches, and as expected the actions are reversed operate the unlock nothing operate the lock switch (which is now connected to the...

Yes know what you mean about the sync, mines a 2001 (been together for 10+ years or so) and what I found in the past that after battery replacement (key or car) you place the key in the ignition and it flashes twice, don't press any buttons take it out and put the second key in and that flashes...

Know what your your saying and yes that may be the end solution but unsolved problems really stick up my nose there's only 4 control lines and 2 power lines from the Bcm to the out station ( + 2 from the window control/monitor which I assume govern current sensing for full open/close and anti...

Hi, the door switches are tested and all fine, I have have even swapped the green/red (lock) and the blue red (unlock) wires over then instead of the indicators flashing when I unlock and nothing on lock it's as expected the other way round, when I lock the indicators flash and nothing when I...

P38 2.5 DHSE Auto Hi everybody it’s happened again, after the last flat battery fiasco and subsequent can’t sync the fobs because the alarm is still active when battery is re-charged I hooked up 60 watts of solar panels to stop it happening again, the P38 is a gracious old lady that now only...

Hi all, ya'll ready for the weird twist to the saga, so messaged LR direct for the EKA after the local main dealer came up empty, got an automated response stating 4/5 working days for an actual reply, checked the door switches ready for the impending code arrival, both duff, no probs connected...

Been to Guy Salmon at Sheffield today to get the EKA, they pulled up all the details for the car but the EKA code had been blanked out, they looked up one they had searched and obtained last week and that was now blanked out, they believe that Land Rover have now stopped dealers from obtaining...

The locking has been fine all the time I have had the car, from both fobs or both front door sill switches, never actually used the key to unlock the car so don't know weather it ever locked/unlocked via the key in the first place

It's a 2001 2.5 Diesel, when I bought it some 7/8 years ago I was told it was the HSE with all the bit's and bobs (Harman Kardon etc), Tried the reconnecting the battery with the key is pos 2 a couple of times but no joy, if I manage to get the EKA from the dealers i will have to take the door...

I am waiting for the dealer to get back to me with the code but am not sure it will work, the forums say you start with 4 turns of the key to the left and then the indicators should flash to say it's ready for the EKA code to be input, tried the four turns but nothing so the switch could be US...

Hi all, had a day going through all the threads and trying all the listed fixes but still no joy. Been away for 4 weeks and the Battery on my 2001 2.5 DHSE ran down while I was away, took it off and charged it up, the alarm activated when I re-connected, tried both fobs no joy, got in let the...

Aha pw999, you could have something there, I actually installed an additional relay for the same reason about 4+ years ago which has bee fine ever since but 4/5 months ago a friend bought one of these wireless readers, we plugged it in to try it but it didn't seem to work/do anything so we...

Hi Wammers, off out on a do tonight so will check that in the morning, thanks for your continued input guys, collective knowledge is a wonderful thing, will also have a dig around in the garages tomorrow as I have a full switch set somewhere so will swap the EAS switches when I find the spare...

Hi, tried it both ways inhibit in prior to starting and inhibit in before stopping leaving it in and then starting but it still wants to lower, I have towed to the coast with the inhibit in and as it should it stops the car lowering when your above 50 it stays at normal whatever speed your'e...