Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. roger01

    P38 Flat Battery Lockout

    Thanks for the input guys, yes I checked the loom from door out station to the plug behind the front door post in the drivers foot well and then on from the corresponding socket to the BECM using a 10w bulb as a series load and everything was fine, did all this when I suspected broken wire or...
  2. roger01

    P38 Flat Battery Lockout

    Hi back again, as mentioned earlier operating the unlock switch and the indicators flashed, operate the lock switch and nothing, swapped the wires over on the door switches, and as expected the actions are reversed operate the unlock nothing operate the lock switch (which is now connected to the...
  3. roger01

    P38 Flat Battery Lockout

    Yes know what you mean about the sync, mines a 2001 (been together for 10+ years or so) and what I found in the past that after battery replacement (key or car) you place the key in the ignition and it flashes twice, don't press any buttons take it out and put the second key in and that flashes...
  4. roger01

    P38 Flat Battery Lockout

    Know what your your saying and yes that may be the end solution but unsolved problems really stick up my nose there's only 4 control lines and 2 power lines from the Bcm to the out station ( + 2 from the window control/monitor which I assume govern current sensing for full open/close and anti...
  5. roger01

    P38 Flat Battery Lockout

    Hi, the door switches are tested and all fine, I have have even swapped the green/red (lock) and the blue red (unlock) wires over then instead of the indicators flashing when I unlock and nothing on lock it's as expected the other way round, when I lock the indicators flash and nothing when I...
  6. roger01

    P38 Flat Battery Lockout

    P38 2.5 DHSE Auto Hi everybody it’s happened again, after the last flat battery fiasco and subsequent can’t sync the fobs because the alarm is still active when battery is re-charged I hooked up 60 watts of solar panels to stop it happening again, the P38 is a gracious old lady that now only...
  7. roger01

    P38 key code lock out

    Hi all, ya'll ready for the weird twist to the saga, so messaged LR direct for the EKA after the local main dealer came up empty, got an automated response stating 4/5 working days for an actual reply, checked the door switches ready for the impending code arrival, both duff, no probs connected...
  8. roger01

    P38 key code lock out

    Been to Guy Salmon at Sheffield today to get the EKA, they pulled up all the details for the car but the EKA code had been blanked out, they looked up one they had searched and obtained last week and that was now blanked out, they believe that Land Rover have now stopped dealers from obtaining...
  9. roger01

    P38 key code lock out

    The locking has been fine all the time I have had the car, from both fobs or both front door sill switches, never actually used the key to unlock the car so don't know weather it ever locked/unlocked via the key in the first place
  10. roger01

    P38 key code lock out

    It's a 2001 2.5 Diesel, when I bought it some 7/8 years ago I was told it was the HSE with all the bit's and bobs (Harman Kardon etc), Tried the reconnecting the battery with the key is pos 2 a couple of times but no joy, if I manage to get the EKA from the dealers i will have to take the door...
  11. roger01

    P38 key code lock out

    I am waiting for the dealer to get back to me with the code but am not sure it will work, the forums say you start with 4 turns of the key to the left and then the indicators should flash to say it's ready for the EKA code to be input, tried the four turns but nothing so the switch could be US...
  12. roger01

    P38 key code lock out

    Hi all, had a day going through all the threads and trying all the listed fixes but still no joy. Been away for 4 weeks and the Battery on my 2001 2.5 DHSE ran down while I was away, took it off and charged it up, the alarm activated when I re-connected, tried both fobs no joy, got in let the...
  13. roger01

    P38 lowers when started

    Aha pw999, you could have something there, I actually installed an additional relay for the same reason about 4+ years ago which has bee fine ever since but 4/5 months ago a friend bought one of these wireless readers, we plugged it in to try it but it didn't seem to work/do anything so we...
  14. roger01

    P38 lowers when started

    Hi Wammers, off out on a do tonight so will check that in the morning, thanks for your continued input guys, collective knowledge is a wonderful thing, will also have a dig around in the garages tomorrow as I have a full switch set somewhere so will swap the EAS switches when I find the spare...
  15. roger01

    P38 lowers when started

    Hi, tried it both ways inhibit in prior to starting and inhibit in before stopping leaving it in and then starting but it still wants to lower, I have towed to the coast with the inhibit in and as it should it stops the car lowering when your above 50 it stays at normal whatever speed your'e...
  16. roger01

    P38 lowers when started

    Hi, the car is at normal ride height when you stop/switch off, as soon as you restart you get the all lights on pre check as normal then solid light for normal height but the disembark is flashing as if you had pressed to lower and the car starts to lower, if you go into drive/reverse or touch...
  17. roger01

    P38 lowers when started

    Hi all. had the 2.5 DHSE for 5/6 years and apart from replacing the rear bags the EAS has been ok in fact the whole vehicle has never faltered in the time I've had it, you can park up for several days and the suspension stays up but of late when you get in and start up the disembark level light...
  18. roger01

    P38A Weird key fob problem

    The strip looks ok but never thought about 2 series batteries and 1 getting kicked out if the + contact strip is tricky, should have thought of that cos the remote for the tracker alarm on my Stag has 3 batts in series and that used to be a right pain so for the past umpteen years I always...
  19. roger01

    P38A Weird key fob problem

    Hi wammers, it's a 2001
  20. roger01

    P38A Weird key fob problem

    Hi mozz, the numbers on label on the PCB of the non functioning fob is the 101 followed by the larger digits 002937 as per pic. the transmit LED on the fob lights when the buttons are pressed, it performs just like a fob out of sinc but for some reason it wont sinc, it has done in the past at...
Back
Top