Recent content by razmrtwo

Aight, thanks a lot mate. That really put my mind on ease...

Thanks mate :) Well actually, its the pump gears which are damage. Is it possible to replace the pump gears only without changing the whole pump assy? Ashcroft Transmissions

My 1998 Range Rover 4.6 HSE is currently having a problem with the transmission pump. I want to buy a new set of pump from here: Pumps & Parts : Automatic, Standard Transmission and Transfer Case Rebuild Kits, Cobra Transmission Parts 1-800-293-1848, Cobra Transmission What type of pump does...

Previously, when the pump gear was damaged, the car won't engage gears. Then the mechanic send the damage pump gear to a machine shop and it worked for a few months. And then the gear got broken again...

Hi all, I am from Brunei Darussalam. As per the title, my car is having a problem with the automatic gearbox fluid pump and I think the gear is in bad nick hence it produces a loud knocking noise. The car also wouldn't engage the gears. Can I just get the gear replace or I need to buy the whole...

Hi mate, theres nothing wrong with changing the oil every 5k miles and thats a good thing to do as well :)

JuiceyV8, that is very helpful and thanks for the feeback :) I think 10/40 is much better suited to the climate in my country.

Hi guys, what is the interval for the oil change for P38 Range Rover? What is the recommended oil for the 4.6 litre engine? Highly appreciate your feedback.

Thanks for the info Cavey. I will look at the motor and see whats happen. I have the copy but I can be bothered to refer to it :o I will have a look at the RAVE and see if I can fig out something :) Again, thanks mate :)

The low range work when i engaged it yesterday. BUT, when i tried to engage it the 2nd time, it didn't engage. I only gets the flashing low gear cog.

Where is the location of the motor? Im sorry to ask the silly question because Im not so familiar with my P38.

I didn't get the "low" flashing while switching from hi to low. Only the amber lights on the low cog flashing.

How to check for all the things u mentioned Datatek? Where is the location of the fuses? Auto. When I put the lever to Low Range, it only flashing but theres no messages on the dash. Only when I put it in D (Low range), the "select Neutral" comes on.

Sorry to hijack the thread, I have the same problem with my P38. The lights on the low gear cogs flashes but thats just it. It didn't change to the low gears. I fiddled with the gear lever but nothing happens. What should I look for?

Can I install an aftermarket car alarm to my P38?