Recent content by philalan

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. P

    S3 - No Drive - Clutch won't engage, nor dis-engage

    Hello all, I have just replaced the gearbox on my series 3 Land Rover with a second hand unit bought on ebay. On starting up the Landie after fitting the box it would not engage any gears, trying to get it into reverse made a loud grating, trying to engage other gears would not engage. I tried...
  2. P

    sloppy transmission sound

    Hi All, I have a nice series 111 that was restored by the guy I bought it from. But it has a very sloppy sounding clunk when lifting off or when feathering the accelerator. Any ideas what it could be??? Cheers Phil
  3. P

    philalan

    Hi all, I live in France and want to sell my UK spec. 2001 P38 Vogue does anyone know of a sell or return garage I could use?
  4. P

    Hi magictiny, Just a quick thanks for your advice about getting a Sync-Mate from Blackbox. It...

    Hi magictiny, Just a quick thanks for your advice about getting a Sync-Mate from Blackbox. It arrived last week and within two minutes after plugging it in it started. Thanks again Philalan
  5. P

    philalan

    Thanks J the range. Have just purchased the following from Blacbox, hope it solves the problem, will let you know I get on once item is received. Details as follows: a BeCM Sync-Mate for a Range Rover P38 1999-2001 with a Bosch Motronic Petrol Engine. The BeCM Sync-Mate solves an increasingly...
  6. P

    philalan

    Thanks magictiny, Have found what I think is the correct item on there site, which is, BeCM Sync-Mate for Range Rover P38 Motronic Engine. Does it matter if the vehicle is petrol or diesel as the video demo on facebook sounds as though it is a diesel? Thanks again Phil
  7. P

    philalan

    Thanks j the range, I am very new to all this, in fact this is my first ever forum so forgive me if I sound a bit vague, the bbs guy you refer to is on this site,so how do I contact him, and the numbers you quote are they the numbers on the black box I should be looking for if I had the product...
  8. P

    philalan

    Thanks Dopey, have tried that but still no go, also tried the key in the door lock while holding the button and turning to the right, this disarmed the car and then asked for the fob in the ignition to be pressed, which then gave me the 'start' engine message but no fire. Thanks again Phil
  9. P

    philalan

    Would you have the site address? Phil
  10. P

    philalan

    Hello everybody, just joined and this is my first request for help. I have a 2001 P38 Vogue 4.6 with a Landi gas conversion. I have two big problems, firstly I left the car in the garage for three weeks and found battery completely dead (familiar with battery drain on the P38) Anyhow, after...
Back
Top