Recent content by Petersfield Pete

Hi I have been working on the gearbox and the centre of the clutch plate had ripped out there seemed no reason was thinking of changing to a solid flywheel but took the advice from Hippo and stuck with the dual mass flywheel all is well with it now thank you all for your help and know if I have...

A long time ago I had this problem with the clutch plate spinning out and an old boy fantastic friend of mine told me that the spigot shaft bearing in the end of the crank needed to be replaced did it and drove it was still okay seven years later and he sold the car so only no it was the cause...

Do not know if you got my last post but I am thinking of replacing the dual mass flywheel with a solid flywheel it's cheaper i wonder will it affect the smoothness of changing gear and the noise as the car runs thank you all for your help

I have taken the gearbox out and the centre of the clutch plate has been ripped out so I will change the spigot shaft bearing in the end of the crank as many years ago this was the cause also replace the dual mass flywheel clutch kit will keep you posted don't know if this is a normal fault for...

I

Just no drive no clutch slip no noises will have the gearbox out today and will let you know what I find wil check the transfer box

I will have the gearbox out today do I check the transfer box in situ dependant on what I see clutch gearbox I will let you know

Well people have hurt my hand so stopped the gearbox strip out but what concerns me is the linkcage is good but no noises that might lead to a problem ie clutch or gearbox seems very strange could it be an electronic problem it is a freelander 2 i do have city and guilds in electronics but could...

I have badly cut my hand needed stitching so can not work till Friday but what is the IRD thank you so much for the email

Good morning Paul just to let you know I have received your thread i have extensive knowledge of clutches and engine's in all types of car's and lorry's changed clutches and ring gear in many of them but this Freelander seems a problem will start to strip it down and see what happens will let...

It is my partner's car she says she drove to work and when she came to drive it nothing there were no noises at any time the car is getting back Monday

My manual gearbox just doesn't drive no leaks good clutch pedal selects all gear's simple doesn't move there was no clutch slip either the clutch was replaced 2 years ago any ideas