Recent content by Pepper

Yep, 1991 also. 3.9 Vogue SE.

Yep it fits fine. Just make sure you have the white connector and that it looks like the one shown on the site. It's like 8 small female bullet connectors...

I've just bought an ISO lead for my RRC. This is what you need; Car Audio & Security: Car Stereo, Speakers & Subwoofers, Car DVD Players, GPS and CD Changers

Hi, I need to replace the kickdown cable on my RRC and having tried to remove the gearbox sump, it seems i'll need to also remove the chassis cross member to provide sufficient clearance. Has anybody done this and can provide any advice? I've read that i'll need to brace the chassis rails...

Hi, I am trying to find the part no.'s for the injector o rings, water pump bolts and the hose which runs from the pump to the inlet manifold. I have tried downloading RAVE but cant get it to work as I'm on a Mac. Could anyone please point me in the direction of a PDF catalogue or help me...

So as I write this I'm waiting in the A40 for the RAC to arrive. My RRC has boiled over out of the expansion tank. I'm already planning in my head the strip down tomorrow but any thoughts as to what it may be? I have noticed recently that there will be White smoke out of the exhaust until...

130 spec and OEM bearings it is then! I stripped everything back this afternoon and connected up the engine hoist, ready to separate the box and engine tomorrow morning. Once it's apart and I can see whats going on, I'll pop down the road and get the necessary parts. Hopefully it'll be all...

Right then chaps, on further inspection the squiggly bit of solid pipe going into the slave had snapped. So I've got a new one of these but still getting no pedal resistance. Took the slave out again to check the rod was still attached and noticed that i could push it all the way in with no...

Hi everyone, After a number of years with Triumphs and MGs I've finally got my first Landy - a 200 tdi. First problem is that on the way home the clutch went. The pedals drops to the floor with hardly any resistance and stays there. Before I go taking the gearbox and transfer box apart...