Recent content by overland rec

I think I mean timing belt cover

I went offroading this weekend with wading plugs in. When I got home I removed them. Tiny bit of oil from bell housing, but when I removed the crank case wading plug loads of hot dirty water poured out which obviously worried me. Where do I start?

Right. I now have +5 pro comp shocks pin to pin and terrafirma +2 springs. The bottoming out has stopped but the springyness is still there. Its like the shocks cant keep up ot they are just too soft . I think the pro comps are no good. Terrafirma +5 s for the pin to pin now?

Yeah they are. They were an ebay special so might not be true

No I cant be. I cant bouncy up and down on the rear bumper and nearly bottom the stops out. Bout 4 inches from bump stop so driving over a speed bump it goes all the way

My discovery has 2 inch spacers and 2 inch springs on old shocks. Ive replaced the rear shocks for pro comp +4 inch, and changed the top shock mount so they are pin to pin. All looked well until I drove up the road. Felt very spongy on the back. I then went over a bump in the road and bang went...

Hi Guys Has anyone ever completely stripped out all the trim, carpets, roof lining before and left it out? Im part of a rally recovery crew and it gets all crappy and muddy and horrible inside after a rally, so if we did away with the interior trim we would need to try and clean carpets. If...

Hi discool. thanks for your reply. I'll start again, Im Gregg from surrey, i have a 1995 300tdi disco and its due an MOT in a few weeks. let the welding commence. so its a yes to fail an MOT with no bulb and a no to when you start the engine the light doesn't go on. do they test the system to...

It has come to my attention that with new MOT's the airbag systems are now a failure if not working. my SRS light was on last year so i removed the bulb, will this fail the MOT with no bulb? and is the SRS warning light meant to come on when you start the engine and go off a few seconds later...