Recent content by Nellysubsea

Installed some 2" lift blocks I had fir a while. (Now need to replace the bushings on the radius arms as there is a knocking noise). Collect a spare turbo that I was going to overhaul and install as mine was on the way out and has been for a while. I was enjoying people looking at me when I...

This is fantastic Tilly

After fitting the snorkel the other week, I took the liberty of replacing the old plastic arches with some wider ones and also some wheel spacers (which by all account has strangely made the handling with the Mud tyres on better I think) Will need to do the welding on the inner arches at the...

Did you get an upgraded steering dampner Tilly2? The front end steering stuff is on my list of to do's and wondering what sort of difference it will make

Bit the bullet and took advantage of a few hours of sunshine to install the snorkel I purchased from OffTrek. As follows. Removed all the items from the kit, checked that the paper template lined up with the snorkel holes. Removed the inner plastic guard under the wing (was dreading what I...

Thats the idea, Not being a facebook or social media person, I cant get in touch with them, This is however what is required, Il measure up the one on my 2004 when im home from Norway and get some silicone pipe ordered up Thanks for the help chaps

https://www.ebay.co.uk/itm/203502702718?_trkparms=amclksrc%3DITM%26aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D140d42ab3889478f94281a01f7792b67%26pid%3D100675%26rk%3D1%26rkt%3D15%26sd%3D203502702718%26itm%3D203502702718%26pmt%3D1%26noa%3D1%26pg%3D2380057&_trksid=p23800...

Cheers Griff, That's the same as the picture I attached big guy, it gives us most of the other stuff but leaves out the bit I'm looking for, Thanks tho

Hello everyone, I have recently purchased a snorkel kit for the Disco2, The installation of which will take place when I return home in the next few days. I am at a loss tho to find the part number or an upgrade for the mesh intake hose that comes from the factory duct in the engine bay from...

2" Suspension lift, coils and shocker's, Extended the wheel speed sensors. Replaced all the brake hoses for longer braided stainless steel ones. Both rear calipers and pads replaced also. Flushed whole system with new fluid 2" lift blocks not installed as waiting to see if they are required...

I took it from the start of the threads from the actuator end to the lock nut

Welcome Digby, A previous Vouge of mine went into limp mode due to one of the map sensors on the one of the air intakes, after having them replaced under warranty all was good for a while. Best get the codes read and see or spray the map sensors with contact cleaner and see if it helps.

Hello Jeja, welcome, Have you a code reader?

Let us know how you get on

I know, I know