Search results

Installed some 2" lift blocks I had fir a while. (Now need to replace the bushings on the radius arms as there is a knocking noise). Collect a spare turbo that I was going to overhaul and install as mine was on the way out and has been for a while. I was enjoying people looking at me when I...

This is fantastic Tilly

After fitting the snorkel the other week, I took the liberty of replacing the old plastic arches with some wider ones and also some wheel spacers (which by all account has strangely made the handling with the Mud tyres on better I think) Will need to do the welding on the inner arches at the...

Did you get an upgraded steering dampner Tilly2? The front end steering stuff is on my list of to do's and wondering what sort of difference it will make

Bit the bullet and took advantage of a few hours of sunshine to install the snorkel I purchased from OffTrek. As follows. Removed all the items from the kit, checked that the paper template lined up with the snorkel holes. Removed the inner plastic guard under the wing (was dreading what I...

Thats the idea, Not being a facebook or social media person, I cant get in touch with them, This is however what is required, Il measure up the one on my 2004 when im home from Norway and get some silicone pipe ordered up Thanks for the help chaps

https://www.ebay.co.uk/itm/203502702718?_trkparms=amclksrc%3DITM%26aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D140d42ab3889478f94281a01f7792b67%26pid%3D100675%26rk%3D1%26rkt%3D15%26sd%3D203502702718%26itm%3D203502702718%26pmt%3D1%26noa%3D1%26pg%3D2380057&_trksid=p23800...

Cheers Griff, That's the same as the picture I attached big guy, it gives us most of the other stuff but leaves out the bit I'm looking for, Thanks tho

Hello everyone, I have recently purchased a snorkel kit for the Disco2, The installation of which will take place when I return home in the next few days. I am at a loss tho to find the part number or an upgrade for the mesh intake hose that comes from the factory duct in the engine bay from...

2" Suspension lift, coils and shocker's, Extended the wheel speed sensors. Replaced all the brake hoses for longer braided stainless steel ones. Both rear calipers and pads replaced also. Flushed whole system with new fluid 2" lift blocks not installed as waiting to see if they are required...

I took it from the start of the threads from the actuator end to the lock nut

Welcome Digby, A previous Vouge of mine went into limp mode due to one of the map sensors on the one of the air intakes, after having them replaced under warranty all was good for a while. Best get the codes read and see or spray the map sensors with contact cleaner and see if it helps.

Hello Jeja, welcome, Have you a code reader?

Let us know how you get on

I know, I know

Bit late to the game. however id be interested

Hello Tintim, Not the best scenario and I fully feel your plight, I returned from holiday one October to a D3 with the sunroof shattered, Thinking something had fallen on it or such like, turns out that the D3's sunroofs just shatter sometimes (clearly thermal expansion and cooling play a...

Has your sloppy performance always been there or is it more of recent thing? I purchased my TD5 D2 auto and it ran very poorly, checked all the vacuum hoses to see if they were perished, check the waste gate valve was functioning, cleaned the MAF & MAS, found the oil in the ECU connector so...

Il be digging into my 04 D2's aircon when I get back from work, as the high pressure side is reading way above what it should be. Well done on your repair

I had a similar issue a few months back, The connections on the battery required some work with the good old vice grip formers for better contact, also the spade connector for the starter motor was very corroded so after replacing that along with the battery for the sake of it, a check and clean...