Recent content by Myredrangey

+1 on a prop shaft universal joint, get under there and give them a wiggle. When my front one went it was obvious because of the play in it...I posted a video a short while back...

I sympathise, I've just changed both universal joints on the front prop shaft and those nuts are a b@stard, I had to take off the transfer box mounting bar to get to the rears. Stupid design! Best of luck!

Having owned the P38 for 7 years I know what you mean.... Really need some advice on the sport as the wife has her heart set on one.

Hi all, am thinking of buying a Range Rover sport, around 2005 or 2006 and either the 4.2 supercharged or 4.4 NA engine. Has anyone any experience owning one - I really like them but am scared it's going to be very unreliable. Thanks in advance....

Yep, marked both pieces before taking it apart.

All done today, picked up a new UJ from local allparts for £23.00 Found the best way to undo the 4 bolts holding the front of the prop shaft on was to move the car slightly forward each time to each bolt at the bottom to loosen it, dropped the front of the prop shaft down and slid it off...

Lol 😅😅

Thanks again, if I can get one I'll be doing it this weekend....

Thanks for the quick replies, I've also heard the UJ can also be changed without removing the prop shaft from the car? Anyone done this?

http://vid441.photobucket.com/albums/qq139/metro-seve/Mobile%20Uploads/trim.3522FD21-0D70-4E8A-A0C4-4AD47451B2F8.mp4 Hi all, my p38 started making a knocking noise when moving today, looking at it I think the UJ on the front propshaft has failed. I've done a short video showing the amount of...

Had a look around the sensor tonight and could not see anything obvious, connections looked clean and no signs of broken or damaged wires. Could not get the sensor itself off the cooler as the screws are siezed. Let's hope I've 'accidentally' fixed it with my investigations....

Can anyone confirm if the message would stay on the screen if the gearbox was actually overheating?

I'll check it out tomorrow...if I can find it! Thanks.

Mine definatly says 'gearbox overheat' 😥

Hi all, just a quick question - my p38 has beeped at me twice in the last couple of days and the gearbox temperature error flashes quickly up but then disappears. If the gearbox were actually overheating should the error message stay illuminated? I hoping it's a false alarm because both times...