Recent content by Milky1190
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
I’ve had error code P0443. EVAP purge valve on my OBD2 after the engine cut out and idle is poor. Took about an inch to 2 inches of pressing accelerator down before RR moved.
Was it easy to locate?
-
http://workshop-manuals.com/landrover/l322-a/engine_management_system__v8/emissions/evaporative_emissions_(evap)_purge_valve/
This is what I found.
-
Anyone any idea what a ‘system purge control valve "a" is and where it’s located?
-
-
This is the only message that came up on the OBD2. I reset it and the LCD still
displays the STOP message.
-
On my 2004 L322 RR vogue I have this message and the car is in a restricted power mode. I can’t read the message fully as the pixels have gone but any idea what that is? There are no warning lights on. Power feels restricted through the accelerator.
Cheers
-
-
I have a 1989 110. Is there a uprated replacement barrel lock that is any good? Will the later pocks fit?
-
1989 110 doors. I had the bottoms repaired with a solid piece...no drain holes so maybe the problem. I cant remember what the old ones looked like or where if any drain holes should go.
-
That maybe my issue......I put new rubber seals on the lower door sills to stop water coming in from the road.......
-
Does anyone have pics of their doors (without door cards) after they have 'reduced' the leaking front defender doors?
I have a 110 with repaired front doors. Ive had the door cards off for the last few weeks monitoring the leaks and I think if I drill drain holes and insert say a piece of...
-
Thanks for the replies. I contacted Clive and bought one of his recovery points with bolts to add to the battering ram of a crossmember I got a few months ago.
-
Cheers, i did send an email a while ago but never got a reply.
-
I have a 6mm rear crossmember fitted. (Black sheep offroad). Can I just bolt on a tow hook dirct to it as a recovery point only not for towing stuff?
-