Recent content by marky

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    For sale P38 soft wrap around Front bar.

    Range P38 front wrap around bar, soft type. Excellent condition. £150 Located Essex
  2. M

    5 x alloys and tyres for sale

    5 x Land Rover 16” alloys and Pirelli scorpion tyres. 255/65/16 £100. Located Essex
  3. M

    Trouble with my ring

    Tried it, no joy. Are you still an Essex boy? Thanks Dan.
  4. M

    In the buff...... ; )

    Title topper.
  5. M

    Trouble with my ring

    Hi all, Can anyone relieve my ring frustration P38 diesel tank pump securing ring will not screw back on without cross threading, no matter how I tackle it. I have fitted a new tank/pump seal, and pump...does the ring have to be renewed also, or is there a handy tip (abuse expected) to screw the...
  6. M

    P38 Non starter.

    Clock guy, I concur with Grrrrrr, great info, along with all others. With blackpipe off at filter, still no fuel.. So I think all are agreed that tank pump is issue. My problem here is after standing since January EAS is on bump stops, without engine running I can't pressurise system? Can I...
  7. M

    P38 Non starter.

    Ok, I have disconnected clear pipe at filter, ignition on, pipe in bottle and no fuel coming out. Bridged relay, swapped relay, checked fuses. So... is it now lift pump fail?
  8. M

    P38 Non starter.

    Clock guy, you now got me thinking about injector no.4 with sensor, I bought it from an online company, who always told me receipt for this Bosch item was in post (schoolboy error). Just a thought, if this was a short lived rogue injector could it be cause of my fuel issue? Marky.
  9. M

    P38 Non starter.

    Sorry Clock guy, l didn't explain that very well, I was replying to tomcat when asked what I meant by cracking injector feed, I meant opening nut on top of injector to release air, I did replace this injector about 18 months ago, you are quite right about cost, it was £180. I will try solenoid...
  10. M

    P38 Non starter.

    Thanks guys, Cracked injector = union at top of injector no.4. Solenoid I will try to locate and investigate. Clock guy, erm, plenty for me to look at.. will try to look in to 1, 2 and 3. Stage 4 will be out of my league. .... Marky.
  11. M

    P38 Non starter.

    Hi all, Thanks for advice Today I bridged fuel relay, cracked open injector feed, turned engine over and watched bubbles move around pipe. I have attempted disconnecting fuel line from filter without success as its tight and don't want to break elbow. Fuel tank has less than a 1/4, If I add...
  12. M

    P38 Non starter.

    Hi all, today I have, Swapped fuel relay, not starting, Depressed fuel cut off switch which clicked but still not starting, I read wammers piece on bridging fuel relay, but am not sure where to put wire to do this. Clear fuel pipe into filter head has air in, there are bubbles in middle and...
  13. M

    P38 Non starter.

    I think it's not getting fuel as wazzajnr mentioned, the daylight wasn't great when I looked this evening, but it doesn't look like the clear fuel line into the filter has much if any fuel in it. I will take a look this weekend, remove fuel pipe from filter crank over and see if fuel is getting...
  14. M

    P38 Non starter.

    Re non starter, not becm sync I bought a sync mate from black box, plugged it in and got solid green light, which I believe means becm synced. Rangie cranks but still won't start, I can't smell any diesel when cranking. I am now thinking new glow plugs Has anyone any other checks or ideas I can...
  15. M

    Becm reset I think?

    Can anyone help out with what I think is becm reset, p38 dhse been sitting 6 months with battery off, now cranks but won't start. Essex based Thanks
Back
Top