Recent content by iceeman

cheers for reply changed for new Bosch fuel pump which is up under wheel arch and now all ok, had to recondition the fuel injectors this year, seem one thing after another this year with fuel system need a holiday form fixing it thanks for advise and help guys

have now changed the common rail fuel sensor getting same engine management light at high revs and lack of power and code P1260 now changing the bosh fuel pump under wheel arch which cost 170 euros is there anything else left to change

if sensor doesn't then next be fuel pump, fuel pump expensive enough so hope which ever it is fixes it this is costing me with work as can't drive i did fuel injectors 3 months ago

changed the fuel filter today , on computer says code P1260 fuel delivery pressure changing the common rail fuel sensor tomorrow, hope thats it only other thing i can think of is fuel pump

one UNDER wheel arch in rear

this happened to me today and had similar for passed couple of weeks but today i broke down with it over last couple of weeks, on long drive over a hour or more i would feel a loss or power on night gears but would be ok after 1 min or more today it happened more and engine management light...

i say the same I'm off weekend, i do it then and post how i get on

cheers, i give read to dads freelander, have to pull console away from dash , think take out radio , then pull off i think the 3 knobs to get to white plate to get to wedge bulbs , think i get in motor factors cheaper than halfords the wedge 1.2 v bulbs

its a pity i have remove central console i had to do this to fit bluetooth radio , thought it be easier just to pull off knobs looks like pull out console, then i need to see if i pull off knobs to take off plate to get to wedge bulbs , have to do them as will fail mot here

cheers for that, your a star

cheers is there a link for rave manual be better than haynes i found this link https://www.landyzone.co.uk/land-rover/freelander-facelift-heating-control-lighting.155771/

cheers for reply i checked fuses and all ok when i bought the td4 few years ago,only left control knob lightup , other 2 didn't, now all 3 are gone, all controls work as far as function but don't light up wondering if there is a bulb in each i have to change and how do i do, do i have to remove...

Question I noticed that my instruction cluster where the air control and fan control near gear stick didn't light up but all controls work Is is bulbs inside and what are bulb type so I can order save me little time Cheers

Update Got switch and got the brake light switch recommended 3 amigos thread here.it worked and sorted it all working and 2 amber warning lights gone . Thanks guys for your help and advise