Recent content by ghostrider

cheers buddy you are a life save was going to do a peter pan it solenied the wire was off plugged it on and it started right on the button happy days ta very much:):):)

no stupid question to this amateur will look first thing ta

so filter bled all okay so went to injector pipes done the crank 10-15 secs over and over with no luck battery now flat so stuck it on charge overnight so see if it takes one. on anther thought the lift pump you guys say is notorious on breaking is this still possiple it is even though its got...

hi guys so whats going wrong on my 300tdi managed to operate the lift pump, bled filter off. closed bleed screw then turned ignition on and pumped some more felt the resistance then done afew extra pumps of the lever as per haynes and still wont start , any ideas i was thinking on haynes it says...

IT WORKED! thank funk for that the bigger irwin worked 13 0r 14mm it was hammered straight on took the crankit was slightly askew but held. new caliper now on which only took 10 mins. i dont post here very often folks i read more and look at the advice, but i wouldnt of done it without you so...

Cheers blue dog I knew I had seen something So plan 3 at weekend plan 2.5 for now I managed to get caliper of (don't ask) bolt still in pic included I wanna try my other wins a bigger socket ad it won't grip the head at all I was thinking the wider flat bit below the head

all great ideas would my problem the top bolt sits in a recess so hard to lube, cut, even hit withn the bloody hammer i got the torch for a beter look on it and its pretty rounded off i think will try the pluggas then mapgas with another replacement irwin socket. it there atool that drilld into...

Guess what guys irwins gripped well, was really straining on the breaker and can't believe the socket snapped in half took less than 10 seconds, so that's round 2 anybody any ideas for round 3?it

Nice clear video cheers Still won't prime though it's a bugger Pumping lever up and down loads no luck Filled filter before fitting, am I missing something

Hi guys so all goes well filter moisture leaked off then changed filter now looking to prime it again, my question fella where the heck is the priming lever I can't locate it at all it's a 90 with a disco engine will add a pic if anyone can count me in the right direction it would help, Haynes...

will the irwins work on a 12 sided head i thought thwy were for 6 sided

hi i just cut the caliper lenghtwise as i was thinking if i could get disc of i could access from the other side

so my frnt caliper a 110 is fooked replacements coming but i just cant get the old one off bottom bolt hardest thing i ever done the top bolt wont budge to the point its partlt stripped the head. so any tips on how to get out as ususl method wont work because cant get a straight line to it to...

you can do it neilly i am peeded of at mo with caliper problems and dont ant to look at it with cut knuckles and a bruised head

oh yeah could also do the one shot kits