Recent content by emoose

Brilliant, many thanks.

My turn to resurrect this thread ;) Removing the intercooler to access the oil cooler seems OK from the manual, I can't see anything on removing the oil cooler pipes from the engine end though, looks like the disappear under the oil filter, is it much of a job at that end? Thanks for any info!

Nothing definitive I'm afraid, I got another set of pipes including valves of eBay which kept the gas in better, still managed to leak out over 18mnths though.

Cheers for the info, got further with the diagnostics since I posted, It came down to 2 faults, 1) AC needs a re0gas 2) The Left & right heat distribution/blend servos on the blink. Got at them and took them apart, the 10K ohm potentiometers were giving out rubbish values, new ones ordered...

Yup, my turn for the blend motors problem! From the wealth of information available I think I'm clear on what needs to be replaced but I wanted to list my symptoms here and get a double check on what I'm thinking, so Symptom: I can't get any hot or cold air to blow into the cabin. Just ambient...

I changed the oil and filter, along with all the other fluids, when I acquired it last year, done under 5K miles since then. Fluid level is fine. Burning ECU, don't like the sound of that! I'll go for a spin and give it a sniff! Thanks for the feedback.

Recently the auto box on my diesel has needed lots of revving to get it to change up through the gears, something like 3k rpm+ to get it into third. Once the engine is warmed up though the problem goes away and it drives fine for the rest of the day, including starting/stopping. Searching...

Excellent I was hoping that was the case, thanks.

Noticed its started leaking a small but consistent amount from around the filler cap, any thoughts on what could cause this? Checked the oil level and that's fine, the crankcase breather is also not blocked as far as I can see (can blow through it!). Only thought I had was that I'd lost an...

This. I found one and worried about it for a while...then found its twin on the other side and the penny dropped!

Thanks guys, carairconditioningsupplies list the correct item, FJC OE R134a Replacment Service Port-High Side OE 134a :: Service Port Caps :: Autokool Ltd, but have no stock. Seems to be plenty of places selling R134a adapters but not the actual service valves themselves. And they have non...

Thought I'd got the AC working after replacing one of the relays, turns out I hadn't, compressor still not kicking in reliably. Got the compressor to work by shorting the black/yellow & white/green wires on the tri switch. Pipes got cold and cold air into the cabin, not exactly arctic cold...

Ouch! you must be made of strong stuff...or rather Nissans aren't! Replaced my drag link & track rod today, used a little ball joint separator from machine mart for the drag link Clarke CHT222 Ball Joint Separator - Machine Mart The track rod ones were happy to pop out on their own!

Right that's useful to know.but the fact that the locks etc had no power seems to me very odd. And the reading just kept going up, didn't seem related to the cart at all...beginning to think my meter is acting up.

Had another going reading it with the meter in series. Still no joy it really. It started reading around 0.5 amps...but it just kept going up, by about a hundredth of an amp each second or so. Also the car had no power, couldn't lock it to put the BECM to sleep or anything, so not really sure...