Recent content by dougiep38
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
D
Good Evening. I meant a 2004 in my original post. So today I checked all the earth's I could see around the engine bay. Cleaned and refitted. I pulled all the fuses out and visually checked them and re fitted. I also took the starter relay out and checked I was getting 12v there to switch the...
-
D
Hi.
Thankyou for your reply. It seems just the same as your issue as I also have no sound. I read on a post that mark c commented on about checking starter relays and powering different parts. I can get the engine to spin over by bypassing the starter relay but still not firing. I'm going to...
-
D
Haha very good. I missed that
-
D
I'm pretty sure it's an l322
-
D
Hi guys
I have a 2001 vogue petrol v8 l322. Some time ago I stopped the car after a short journey and left it for around 2 hours. On returning I had all ignition lights and functions but the engine wouldn't turn over. It's been sat for 18 months now ( I know that's not great) and have just...
-
D
Ahh ok I'll keep my fingers crossed and avoid low range for a bit thanks for your help
-
D
It's a diesel. U also think I may have fixed it. I put it into low today and it got stuck there. A lot of fiddling with the switch and disconnecting the battery a messing I got it To go back into high and the failsafe problem has disappeared. So can I assume it's the motor for the high low???!
-
D
Hi guys
So I moved on from my beloved p38 to an 03 reg l322. Love the car hate the Niggly faults. When I'm driving it around 10 minutes into any journey I get the dreaded transmission failsafe message but it has no effect at all on gear selection or function. It can come on then off up to 8...
-
D
Yea thats a good suggestion as I've read things about the dash boards playing up but they still start. This won't do either. I just have a click in the becm and the relay board under the bonnet when the key is turned to start.
-
D
Hu guys I sent the becm off to rick the pick and he was very helpful and fast with the turn around. Unfortunately it hasn't sorted the problem I have. I put it back on with a new fuse board (under bonnet) and no change. Just the green screen in the middle. I've spent 3 hours checking wiring and...
-
D
Yea all fuses are ok. Ive sent the becm to rick the pick he seemed very helpful. Fingers crossed
-
-
D
If it was out of sync would it stop all the ignition lights coming on like no bulb check
-
D
Ok I'll try and find him thanks
-
D
Hi guys it's me again!
After all the help I had from some very experienced range rover guys last time I posted here I'm back.
So I got the p38 bug and went and bought another 2.5 dse on an m plate. I bought this truck with the problem that hasn't yet been looked into (or so I'm told) by the...