Recent content by discosrme
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
D
When I had problems like this it turned out to be a weak starter motor.
-
D
when taking it out of diff lock try reversing a bit first just in case of transmisiion wind up.
Simon
-
D
the Ebay one are ok, but do need a bit extra work to get them to line up correctly.
I have one fitted to mine and i am pleased with it so far but not had to use it in anger as of yet. I used plenty of tiger seal on all of the joints to make sure they are sealed properly.
-
D
I have read somewhere people have fitted Vw/Audi electric vac pumps.
-
D
I fitted a pair of these in the back high up either side of the door instead of the useless boot lighting that is standard.
So much better now, I can acctually find things in the boot area...
-
D
I have just fitted one of these, and at the price you cant go wrong. They are very solid and good quality.
Heavy Duty RSB Landrover Discovery Winch Bumper
-
D
I seem to remember reading some where that people have fitted the VW/Audi electric vac pumps but not sure where i read it.
Simon
-
-
D
Some pics would be good, I have already got a winch bumper fitted so that's not a problem. The bits that will need to be cut out for the arch kit are the bits that the paint is scabby so a win win there.
Cheers
Simon
-
D
Hi
Has any one fitted the wide arches but not lifted the suspension?
I have to park in a multistory carpark at work so lifting my disco is not possible but I want to fit the bigger arches to give clearance for bigger wheels and tyres. If any one could post a picture of this setup it would be...
-
D
Put some more fluid in and have a look where its leaking from. Start the engine up and get some to turn the wheel from lock to lock whilst looking for the leak.
Hope that helps.
Simon
-
D
The Austalians tend to fit them on the front bumper, and another tip if you do so is to mark the whip level with your roof height. No more driving under thing tha are too low!!!
Simon
-
D
My 300tdi EDC buzzes when the ignition is on. I think its normal.
Simon
-
D
The hard thing would be making sure that the crap doesn't get stuck behind the fiberglass and making things worse.
-
D
If they havn't been changed in a long while I would spray some penetrating oli down there a couple of days before changing, as they can snap off!!!