Recent content by DiscoForFun

Hi Peter, Again many thanks for your time and effort, will now be able to get some time in tomorrow.

Hi Peter. I have now got the No. Plate lights working but I am still stuck with the rear wiper motor. I have a Haynes manual for the 200tdi but the actual wires for the rear door do not match for the wiper as per a 92 disco. The rear screen heater and washer are working so it is just the wiper...

Thanks Peter thats great.

Hi All, looking for help, have fitted a Disco 300tdi door to my 200tdi and need some help with the wiring. I am only interested in coupling up the No. plate lights, wiper and heated rear window, so I require the wire colour codes for those items for both doors. I believe I am correct in...

First report: Over 2 weeks and running like a dream. Engine, gearbox and both axels transplanted from 300tdi Disco as well as entire front end back to the bulkhead. Now need wiring diagram for conversion of rear door No. Plate lights, wiper and heater. Any help would be appreciated.

Look at the small print on your insurance: If you do not have a valid MOT, and maintain your vehicle in good order, you will not be insured. And to explode your other myth: No tax so cannot get vehicle Mot’d - catch 22: Purchase of insurance does not require the vehicle to be Taxed or...

Hi Dent: Help much appreciated, thanks for the quick response

Have just completed a Disco 300tdi transplant into a Disco 200tdi : Engine, gearbox, axels and need to keep the original speedo cable drive. (do not want to get into changing dash components) Can I pull out the electric sender drive and replace it with the original cable drive? Does it just pull...

Not really after warnings of what would result from a clutch slave pushrod floating around in the bell housing, that’s a no brainer or that a new clip is an outlay of 99p. The refitting of this clip has shown to be particularly problematic and, just possibly, may not be required at all provided...

Hi All Newbe to landrover: I am aware of the many threads on the refitting of the small plastic clip on the clutch slave cylinder push rod, but my question is this: Has anybody got experience of using their vehicle without replacing this clip after reassembly of the slave cylinder. I.E. I have a...