Recent content by colintandy
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
just dont overtighten as you will put to much strain on the bearings on the alternator pulley a good idear is to clean alternator with fresh clean water and then try and get some general purpose oil on them i use 3-in 1 oil as i find wd 40 for the bearings is to light but great for the...
-
hi Murkster
just read this hope this helps
the light comes on in water when you get the alternator wet also with missing teeth on belt it will cause it to slip and no doubt break apart very soon the other belt is your power steering belt and the reason your steering goes stiff is because...
-
hi i was competing in the scorpion racing novice challenge and was tryin to position vehicle to reach a punch very slippy and back right slipped into large rutt and front end was on the bank all went over slowley all ok i managed punch in end and got another 3 after and one the fastest wheel...
-
hi has anyone got a spare drivers side passenger window for a 3 door discovery need one soon as pos will buy off you regards colin
-
hi mate i think its the trim levels cloth/half leather ect..
-
have you tried holding with a pipe wrench and soaking nuts in wd40 thatl work:rolleyes:
-
HI HAVE a look at www.scorpionracing.co.uk they do a great 2 lift kit which will include springs and gas shockers regards colin
-
try www.scorpionracing.co.uk they also ship world wide is where i got mine from regards colin
-
hi guys sounds like one of your shockers has gone or you got a bust front spring both easy to do if you check out underneath and look at the bottom of the spring where it seats thats where mine went but also check shockers while you got it all apart just be safe regards colin
-
hi i belive it is 0.20mm goto do mine soon regards colin
-
know how you feel mate just had a quote to do my engine crankseal gonna be a slim wallet for a while:eek: had to ground truck for while as i took all steering of to replace as many bits as i can befor challenge is getting there inch by inch taken all bumpers of and those pathetic plastic side...
-
thanks mate im pixxxx of now gonna have a beer :D
-
is defently engine oil whats the best way to drop box never done befor is it props of both ends take cross member out what about special tools or is it just nuts n bolts job
-
hi any body know how to change the oil crank seal on a 200tdi discovery automatic think mine is gone
sympton changed oil other day befor that drained all sump and took bell housing plug out met about 2 litres oily mess let it all draion out put the wading plug back in the bell housing took for...
-
just out of intrest tim what items you got missing from engine and if you send me your address in private mail will post you the lapbelt out will have aword with a mate who might have some spare parts knocking about wont see him till sat/sun though