Recent content by Chrisandtaba
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
C
So after covering everything including myself in oil, it appears that the oil seal had become detached and was floating in the housing. How on earth this happened I don't know but I refitted it and it seems ok now
-
C
They were identical in size, I checked. Could the filter work loose?
-
C
I have just replaced the oil filter and seal on my series 3 2.25 petrol and checking the mounting was clean and had no remnants of the old seal in. All was fine and then I took her for a drive and oil is now pouring out of the top of the oil filter housing where it joins the mounting. I had this...
-
C
Trying to decide what colour to paint my series 3, it was horrible green but is now beige halfords high build primer. Thinking NATO green ? Going to roller it on. What do people think?
-
C
Yes it does. Have started and run it 4 times now and seems to be okay. Fingers crossed this has sorted the issue. Will keep you posted. Thanks everyone for your help and advice
-
C
Not sure how to attach incorrectly as cannot see. Fitted from the top and hooked top of follow in and then rotated downwards
-
-
C
So new fuel pump arrived today and when i came to fit if i noticed the cast flange clashed with a bolt head so wasn't seating properly! Had to file it down to make it fit which makes me think the other one wasnt fitted properly either. I also found 3 gaskets when i took it off that someone else...
-
C
Hello everyone - have moved my post about the fuel problems to the series forum
-
C
Help - my landy starts an runs okay but after about 5 minutes i get air bubbles in the fuel line and it breaks down. I recently replaced the fuel pump and that's when the problems started. Have tried PTFE tape on union but no difference and have tried sleeving section of nylon pipe from chassis...
-
C
Help - my landy starts an runs okay but after about 5 minutes i get air bubbles in the fuel line and it breaks down. I recently replaced the fuel pump and that's when the problems started. Have tried PTFE tape on union but no difference and have tried sleeving section of nylon pipe from chassis...